XM1S Sport Mini TC (4wd M Chassis) MTC

Xpress

Aluminium Anti Tweak Battery Holder XQ11

Aluminum mount spring loaded battery mount for the Execute XQ11! Mix of aluminium and graphite components make for a strong and lightweight battery mounting solution. Feature: For: Xpress Execute XQ11 Material: Aluminum Colour:...

Xpress

RC Ceramic PTFE Bearing (3x6x2.5mm) 10pcs

RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings...

Xpress

RC Ceramic Bearing (10x15x4mm) 10pcs

  Feature:   RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer...

Xpress

RC Ceramic PTFE Bearing (10x15x4mm) 10pcs

Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock...

Xpress

2.5mm FRP Main Chassis Plate AT1S

Replacement parts for the Xpress Arrow AT1S, genuine part for Xpress series of cars.   Feature: For: Arrow AT1S Material: FRP Colour: Black   Include: 2.5mm Chassis Plate (1 pc)

Xpress

Shaft Driven Gear Differential Set AT1S

Replacement gear differential for the Xpress sports shaft driven touring the AT1S.   Feature: For: Arrow AT1S Material: Plasic Colour: Black   Include: Gear Differential (1 set) Bearings (2 pcs)

Xpress

Aluminium Anti Tweak Battery Holder XQ2S XQ1S XQ1 XM1S XM1 FT1 FT1S XQ10 FM1S

  Spring loaded anti tweak battery holders for the Execute series of cars! Highly adjustable for different types of batteries, including different height posts to use with either normal or LCG batteries! Without using tape, the chassis is not under...

Xpress

Anti Tweak Battery Holder For Execute XQ1 XQ1S XQ1 XM1S XM1 FT1 FT1S XQ10 FM1S

Hate tape? Use this free float battery mount for you Execute series of cars! By removing the need for battery tape, it removes the unwanted tweak generated when applied across the battery. Your choice of using the supplied tabs or...

Xpress

Aluminium 4 Degrees C Hub For XM1 XM1S

Gain more stability with these aluminium c hubs, reducing flex during high speed cornering for more stability. Feature: For: Xpress XM1 XM1S Material: Aluminum Colour: Black Red Include: Aluminium 4 Degrees C Hubs (2 pcs) Set screws (2 pcs)

Xpress

225mm Wheelbase Graphite 2mm Upper Deck For XM1 XM1S

Spare upper deck for Xpress Execute XM1 with the 225mm conversion kit Feature: For: Xpress Material: Graphite Colour: Black Include: 225mm Wheelbase Upper Deck (1 pc)

Xpress

2.0mm Graphite Upper Deck 239mm For Execute XM1 XM1S

Spare upper deck for Xpress Execute XM1 with the 239mm conversion kit! Feature: For: Xpress Execute XM1 XM1S Material: Graphite Colour: Black Include: 2.0mm Graphite Upper Deck 239mm (1 pc)

X-Square

Aluminium FR Spilt Suspension Mount Set For Xpress XQ1 XQ1S XM1 XM1S FT1 FT1S XQ10

Easily test setup of a solid and split FR mount on your Xpress touring car with this suspension mount setup. Remove the stiffening bar with a ball-stud 2.0mm hex tool and you will have split blocks! This changes the flex in the FR suspension block area...

Xpress

Xpress Spring Steel Double Joint Universal Shaft 2pcs For Execute XM1 XM1S

Spring steel double jointed universals with a replaceable pin to exchange when worn out! Smoother cornering when compared to traditional single jointed universals! Fits XM1 & XM1S * These are designed for the XM1 and it is...

Xpress

Xpress Hard Composite Suspension Parts Set For XM1 XM1S

Keep every Hard Composite Suspension part in your parts box with this special combo deal! Harder suspension parts for use in medium to high grip conditions! This also allows for more efficient suspension with more grip generated as the arm flexes less...

X-Square

X-Square Alloy Split Front Upper Clamp Left and Right For Xpress XQ1 XQ1S XM1S

Alloy split front upper clamp for Execute XQ1 XQ1S XM1S XM1! Alloy split upper bulkheads for Xpress's Execute series of cars, split bulkheads will allow for more chassis flex and will prove as a powerful tuning tool! Feature : For: Xpress Execute...

X-Square

X-Square Alloy Split Lower Bulkhead Left and Right For Xpress XQ1 XQ1S XM1S

Alloy lower upgrade bulkheads for Execute XQ1 XQ1S XM1S XM1, upgrade from plastic to alloy to get more flex and consistent grip on bumpy tracks or in high temperatures! A sleek black CNC cut aluminium with high shine silver edges!  Feature...

Xpress

Xpress XM1 XM1S FM1S Alloy Steering Block

Gain more stability with these alloy steering blocks, reducing flex during high speed cornering for more stability. Feature: For: Xpress XM1 XM1S Material: Aluminum Colour: Black Red Include: Aluminium Steering Blocks (2 pcs) Shims (2...

Xpress

Xpress XM1/XM1S Alloy Rear Upright

Gain more stability with these alloy upright s for the XM1/XM1S, the camberlink hole is of a middle hole when compared to the plastic part giving a more neutral handling feel. Feature: For: Xpress XM1 XM1S Material: Aluminum Colour: Black...

Xpress

Xpress Double Joint Universal Shaft 2pcs For Execute XM1 XM1S

Replacement Double Joint Universal Shafts for Execute XM1, or a direct fit upgrade for the XM1S (5x10x4mm bearings unchanged). Double jointed universals reduce the angle which the shafts are at so reduces the vibrations generated and thus give a better...

Susumu

Susumu Workshop Graphite Option Chassis Plate 2.0mm For Xpress Execute XM1S

Economical upgrade option from Susumu Workshop for your Xpress Execute XM1S! Convert the chassis to carbon fibre to get less flex and better handling characteristics in hot conditions!