-
Xpress
Aluminium Anti Tweak Battery Holder XQ2S XQ1S XQ1 XM1S XM1 FT1 FT1S XQ10 FM1S
Spring loaded anti tweak battery holders for the Execute series of cars! Highly adjustable for different types of batteries, including different height posts to use with either normal or LCG batteries! Without using tape, the chassis is not under...
£42.50 -
Xpress
Strong Composite Suspension Parts Set V2 For Execute Series
New and improved suspension arms. These will be direct upgrade on the Execute series, during testing it was found that these suspension pieces gave more corner speed! Version 2 introduces an inner hole for mounting your rear shocks onto for a even more...
£34.95 -
Xpress
Hard Strong Composite Suspension Parts Set V2 For Execute Series Touring
New and improved suspension arms. These will be direct upgrade on the Execute series, during testing it was found that these suspension pieces gave more corner speed! Version 2 introduces an inner hole for mounting your rear shocks onto for a even more...
£38.95 -
Xpress
On-power Control System V2 0 Deg Aluminium C-hub 2pcs For Execute Series Touring
This is the replacement part for the suspension arm from the On-power Control System V2 #XP-10641. On-power Control System changes how your car behaves in the middle of the corner, adjust the angle with spacers to differ the toe-in change during...
£45.00 -
Xpress
Aluminium C-hub 4 Deg 2pcs For On-power Control System V2
Positive caster angle rear C-Hubs for our On-Power Control System V2 #XP-10641, adding on-power stability to the rear. Whilst also shortening the wheelbase which can be handy when running 0 arm sweep. Also included are the new kingpin sets which are...
£45.00 -
Xpress
Aluminium C-hub 2 Deg 2pcs For On-power Control System V2
Positive caster angle rear C-Hubs for our On-Power Control System V2 #XP-10641, adding on-power stability to the rear. Whilst also shortening the wheelbase which can be handy when running 0 arm sweep. Also included are the new kingpin sets which are...
£45.00 -
Xpress
X-Square Aluminium Front Bumper Set For FT1 FT1S
Change to this aluminum bumper set for more durability in the front end! Besides protecting your car, this also offers more protection for your bumper-mounted fan! Also adds a tiny bit more weight when compared to the stock bumper set. The carbon upper...
£36.50 -
X-Square
X-Square Spring Steel Double Joint Driveshaft 41mm for Xray T2/T3 /T4 XPRESS FT1S/FT1/XQ1/XQ1S
Smoothen your car's cornering with these Double Jointed Driveshafts by X-Square! Compared to traditional single jointed drive shafts, by having double joints the angle of the universal at full steering lock is reduced, which in turn reduces the chatter...
£42.50 -
X-Square
Aluminium FR Spilt Suspension Mount Set For Xpress XQ1 XQ1S XM1 XM1S FT1 FT1S XQ10
Easily test setup of a solid and split FR mount on your Xpress touring car with this suspension mount setup. Remove the stiffening bar with a ball-stud 2.0mm hex tool and you will have split blocks! This changes the flex in the FR suspension block area...
£37.50 -
Xpress
Xpress Strong Composite Suspension Parts Set For FT1 XQ1 XQ1S
New and improved suspension arms. These will be direct upgrade also on the Execute XQ1 series, during testing it was found that these suspension pieces gave more corner speed! If you are upgrading from the old set of suspension arms, you will need to...
£35.95