FT1S Sport Frontie touring Car Spares

Xpress

NBR Shock Membrane V2 4pcs

Genuine Xpress replacement part, keep important spares in your pits box so your raceday or practice day isn't cut short! Made from nitrile butadiene rubber, prolonging membrane life! Feature: For: Xpress Shocks Material: Nitrile Butadiene...

Factory Pro

Factory Pro Ceramic Ball Bearing 3x6x2.5mm (1pc)

Bearings for the steering for most of the Xpress Range Feature: Material: Steel/Ceramic Colour: Silver   Include: Bearings (1 pcs)  

Xpress

Steering Rack Bearing 3x6x2.5mm 2pcs

Replacement bearings for the steering racks on the Xpress Execute Cars. Feature: For: Xpress Execute Steering Rack, 1/10 Touring Cars Material: Steel Colour: Silver   Include: Bearings (2 pcs)

Xpress

Aluminium Front Shock Tower Spacer For Execute FT1 FT1S

Execute FT1/FT1S genuine official replacement part from Xpress. Feature: For: Execute FT1 FT1S Material: Aluminium Colour: Red Include: Aluminium Front Shock Tower Spacers (2 pcs)

Xpress

Composite Upper Deck Stiffener 2pcs For Execute Series Touring

Plastic upper deck stiffener for tune the flex of the top deck stiffer but not too stiff when using the aluminium version! Feature: For: Xpress Execute XQ2S FT1 FT1S XQ10 XQ10F Material: Composite Colour: Black Include: Composite Stiffeners...

Xpress

Composite Wheel Hub Hex Set 4pcs For Execute

Execute XQ1S XQ2S XM1S FT1S FM1S genuine official replacement part from Xpress. Feature: For: Xpress Execute XQ1S XQ2S XM1S FT1S FM1S Material: Plastic Colour: Black Include: Wheel Hex (4 pcs) Wheel Hex Pins (4 pcs)

Xpress

King Pin Set 2+2 For Execute V2 Strong C-hub

Replacement King pin for the new V2 Strong C-Hub found on the Execute XQ2S DR1S, be sure to keep a set in your parts bag or when you're upgrading from the old C Hubs! Note: To use this new collar with other touring chassis in the Execute series,...

Xpress

Xpress 5x7x0.2mm Drive Axle Spacers 10pcs

Reduce the amount of free play you might get from bearing slop in your driveshafts with these shims. Applicable to the front or rear.   Feature:   For: Driveshaft Axle Spacing Material: Steel Colour: Silver   Include: 0...

Xpress

Lock Nut Lock Nut 7.0mm 10pcs

Lock Nut 7.0mm 10pcs Feature: For: Execute XQ1 XQ1S Material: Steel Colour: Black Include: Locknuts (10 pcs)

Xpress

Lock Nut 5.5mm 10pcs

Lock Nut 5.5mm 10pcs     Feature: For: Execute XQ1 XQ1S Material: Steel Colour: Black Include: Locknuts (10 pcs)

Xpress

Xpress Double Joint Universal Shaft Coupling Pins For XQ1 XQ1S FT1 FT1S XQ10

Rebuild parts for the Double Jointed Universals that come with all of the Xpress XQ1 XQ1S FT1 FT1S XQ10 kits! Feature: For: XQ1 XQ1S FT1 FT1S XQ10 Material: Steel Color: Silver/Black Include: Couplers (2 pcs) Pins (2...

Xpress

Xpress Composite Anti-Roll Bar Ball Joint 4pcs

Genuine official replacement part from Xpress, official replacement part for the Execute XQ10 Feature: For: Xpress Execute XQ10 Material: Grey Composite Color: Grey Include: Roll Bar Joints (4 pcs)

Factory Pro

Factory Pro 3mm Red Shim/Washer (10 pcs)

Factory Pro 3mm Red Shim/Washer (10 pcs)   Material - Alloy Colour - Red 10 per pack

Xpress

Xpress 3x18mm Flat Spot Suspension Pivot Pin

Flat pin suspension pivot pin, for use in both the front C hub and rear hub. The flat spot allows for more surface area for the set screw to secure the pin in place and prevent it from flying out. Feature: For: Xpress  Material: Steel Colour:...

Xpress

Execute XQ1 4.8mm Flat Ball End 13MM (2pcs)

This is Execute XQ1 Execute 4.8mm Low Profile Ball End, genuine official replacement part from Xpress. Feature: For: Xpress Execute XQ1 Material: Plastic Colour: Black Include: Low Profile Ball End 13mm (2 pcs)

Xpress

C Hub King Pin Set 2+2 For Xpress

C Hub King Pin Set 2+2 For Xpress Feature: For: Xpress  Material: Steel Colour: Black Include: C Hub King Pins (4 pcs)

Xpress

Execute Shock Membrane

Execute XQ1 Shock Membrane Feature: For: Xpress Execute XQ1 Material: Silicone Colour: Blue Include: Shock Membrane (8 pcs)