-
Xpress
Steel Gearbox Shaft For Execute FT1 FT1S
Execute FT1/FT1S genuine official replacement part from Xpress. Feature: For: Execute FT1 FT1S Material: Steel Colour: Black Include: Steel Gearbox Shaft (1 pc)
£7.50 -
Factory Pro
Factory Pro Ceramic Ball Bearing 10x15x4mm (1 pcs)
Ceramic Bearings for most of the Xpress Range Feature: Material: Steel/Ceramic Colour: Silver Include: Bearings (1 pcs)
£7.95 -
Xpress
Gear Differential Bevel Satellite Gears Set for Execute, Xpresso, GripXero Series
This is Xpress Gear Differential Bevel Satellite Gears Set, genuine official replacement part from Xpress. Feature: For: Xpress K1 M1 XQ1 XQ10 XQ10F XQ1S XQ2S XM1S FT1 FT1S FM1S D1 DR1S Material: Plastic Color: Black Include: Satellite...
£7.50 -
Xpress
Spur Gear Adaptor For Execute FT1 FT1S
Execute FT1/FT1S genuine official replacement part from Xpress. Feature: For: Execute FT1 FT1S Material: Aluminium Colour: Red Include: Spur Gear Adaptor (1 pcs)
£7.50 -
Xpress
Battery Mount Set For K1 M1 D1 FT1 FT1S
This is Xpress Battery Mount Set, genuine official replacement part from Xpress. Feature: For: Xpress K1 M1 D1 FT1 FT1S Material: Plastic Colour: Black Include: Battery Mount (2 pcs) Regular Battery Bracket (2 pcs) Shorty Battery Bracket (2...
£9.50 -
Xpress
Bando Kevlar Drive Belt Front 3 x 150mm For Execute FT1 FT1S
Belts made from a kevlar material for the Execute FT1 series, made for longer lifespan but sacrificing some durability at the same time for use when using high powered motors! Feature: For: Xpress FT1 / FT1S Material: Kevlar Colour:...
£8.50 -
Xpress
Strong Front And Rear Composite Suspension Arms V2 For Execute Series Touring
New and improved suspension arms. These will be direct upgrade on the Execute series, during testing it was found that these suspension pieces gave more corner speed! Version 2 introduces an inner hole for mounting your rear shocks onto for a even more...
£8.95 -
Xpress
Hard Strong Front And Rear Composite Suspension Arms V2 For Execute Series Touring
New and improved suspension arms, in our hard material. These will be direct upgrade on the Execute series, during testing it was found that these suspension pieces gave more corner speed! Version 2 introduces an inner hole for mounting your rear shocks...
£8.95 -
Xpress
4.8mm Low Profile Ball End 13mm 4pcs
This is Execute XQ1 Execute 4.8mm Low Profile Ball End, genuine official replacement part from Xpress. Feature: For: Xpress Execute XQ1 Material: Plastic Colour: Black Include: Low Profile Ball End 13mm (4 pcs)
£8.95 -
Xpress
Long Travel Short Shock Grey Composite Shock Parts
Replacement plastic shock parts for the V2 long travel short shock set #XP-10593, this is a direct upgrade for the stock shocks from the XQ2S. It can still fit with original kit short shock from XQ10 and FM1S, but the shock length will be decrease...
£9.95 -
Xpress
5.5mm Ball 10mm Thread 4pcs (longer gap between flange)
This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle. Feature: For: Xpress Shock Mounting Material: Steel Colour: Black Include: 5.5mm Ball Ends (4 pcs)
£7.50 -
Xpress
5.5mm Ball 8mm Thread 4pcs (longer gap between flange)
This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle. Feature: For: Xpress Shock Mounting Material: Steel Colour: Black Include: 5.5mm Ball Ends (4 pcs)
£7.50 -
Xpress
Hard Strong Composite V2 C Hub 4 Degree For Execute Series Touring
Updated C Hubs found on the Execute XQ2S #XP-90032 and can also be used in other Execute Touring cars when used in conjunction with 3.0mm outer suspension pin arms and the #XP-10401 C-hub king pin set! Feature: For: Xpress Execute XQ2S DR1S For...
£8.95 -
Xpress
Low Profile Bumper Body Post Set V2
Newly designed bumper pieces and body posts to be used with the low profile bumper foam XP-10562. Included are two bodypost mounts to rotate the rear mounting by 90 degrees, to mount the body posts parallel to the chassis. Note: The bumper parts...
£9.50 -
Xpress
Front Bumper Set For Execute FT1 FT1S
Execute FT1 / FT1S genuine official replacement part from Xpress. Feature: For: Execute FT1 FT1S Material: Plastic Colour: Black Include: Upper Bumper Plate (1 pc) Lower Bumper Plate (1 pc) Fan Mount (1 pc)
£7.50 -
Xpress
4 Hole Damper Piston 4pcs For K1 M1 XQ1S XM1S D1
Replacement damper piston for Xpress's K1 M1 XQ1S XM1S or D1, featuring four holes for a lighter dampening effect in your shocks! Feature: For: 1/10 Onroad Cars Material: Plastic Colour: White Include: Damper Pistons (4 pcs)
£8.95 -
Xpress
Aluminum Short Shock Adjustable Nut 2pcs
Replacement part for the Execute XQ10 short shock. Feature: For: Xpress Execute Short Shock Material: Aluminium Color: Red Include: Short Shock Adjust Nut (2 pcs)
£9.50 -
Xpress
Xpress Double Joint Universal Shaft Axle For XQ1 XQ1S FT1 FT1S XQ10
Rebuild parts for the Double Jointed Universals that come with all of the Xpress XQ1 XQ1S FT1 FT1S XQ10 kits! Feature: For: XQ1 XQ1S FT1 FT1S XQ10 Material: Steel Color: Black Include: Double Joint Universal Shaft Axles (2 pcs)
£9.95 -
Xpress
Xpress Double Joint Universal Shaft Case For XQ1 XQ1S FT1 FT1S XQ10
Rebuild parts for the Double Jointed Universals that come with all of the Xpress XQ1 XQ1S FT1 FT1S XQ10 kits! Feature: For: XQ1 XQ1S FT1 FT1S XQ10 Material: Steel Color: Black Include: Double Joint Universal Shaft Cases (2 pcs)
£9.95 -
Xpress
Xpress 3.0mm Outer Suspension pin w/ Groove 4pcs For FT1 XQ1 XQ1S, XQ10, XM1
New 3.0mm outer suspension pins, to be used with the new "Strong" series of redesigned suspension arms for the Execute series! Feature: For: Xpress Execute Series Material: Steel Colour: Silver
£7.95