XQ10 & XQ10R Parts

Xpress

5.5mm Ball 8mm Thread 4pcs (longer gap between flange)

This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle. Feature: For: Xpress Shock Mounting Material: Steel Colour: Black Include: 5.5mm Ball Ends (4 pcs)

Xpress

Hard Strong Composite V2 C Hub 4 Degree For Execute Series Touring

Updated C Hubs found on the Execute XQ2S #XP-90032 and can also be used in other Execute Touring cars when used in conjunction with 3.0mm outer suspension pin arms and the #XP-10401 C-hub king pin set! Feature: For: Xpress Execute XQ2S DR1S For...

Xpress

King Pin Set 2+2 For Execute V2 Strong C-hub

Replacement King pin for the new V2 Strong C-Hub found on the Execute XQ2S DR1S, be sure to keep a set in your parts bag or when you're upgrading from the old C Hubs! Note: To use this new collar with other touring chassis in the Execute series,...

Xpress

Low Profile Bumper Body Post Set V2

Newly designed bumper pieces and body posts to be used with the low profile bumper foam XP-10562. Included are two bodypost mounts to rotate the rear mounting by 90 degrees, to mount the body posts parallel to the chassis.   Note: The bumper parts...

Xpress

Flanged Bearing 3x6x2.5mm 2pcs For Execute Flex Elimination Upper Deck

3x6x2.5mm flanged bearing, for use in Execute Flex Elimination Upper Deck adjustment area.The Flex Eliminator Upper Deck comes out of box from the XQ2S, FM1S and XQ10F kits.If use with XQ10, please use with 2.0mm Graphite Upper Deck For Flex Elimination...

Xpress

Composite Upper Deck Collar For Flex Elimination For XQ10 FM1S

Plastic Upper Deck Collar which allows you to control the flex on either end of your car. This part is ready for use in XQ2S, XQ10F and FM1S out of box. If you are upgrading the XQ10, XQ1/ XQ1S, FT1 / FT1S, you need to use also the: 2.0mm Graphite...

Xpress

Body Support Brace For Execute XQ2S Strong V2 C Hub

Body support braces to be used in conjunction with the new V2 Strong C Hubs, found on the Execute XQ2S or even for upgrading your Execute series car!Feature: Feature: For: Xpress Execute XQ2S, Strong V2 C Hub Material: Composite Color:...

Xpress

Sports Composite Short Shock Set 2pcs

Short shock sets as same as the original ones that came with the Execute XQ2S, will also fit other Xpress series cars with short shock towers installed! For XQ1, XQ1S and XQ2S, please use: FRP 3.0mm Front Short Shock Tower #XP-10791 and FRP 3.0mm...

Xpress

Aluminium 2 Piece Piece Suspension Mount (+0.75) For XQ1, XM1, FT1, XQ10

Increase the track width for your Execute Series car! Gain 1.5mm in total (0.75mm each side) in track width in the rear!    Feature: For: Xpress Execute XQ1 XQ1S XQ2S XM1 FT1 FT1S XQ10 FM1S Material: Aluminum Colour:...

Xpress

Aluminium RR Lower One Piece Suspension Mount (+0.75) For XQ1, XM1, FT1, XQ10

Increase the track width for your Execute Series car! Gain 1.5mm in total (0.75mm each side) in track width in the rear!  Feature: For: Xpress Execute XQ1 XQ1S XQ2S XM1 FT1 FT1S XQ10 FM1S Material: Aluminum Colour: Black Include: 0...

Xpress

Xpress V2 Strong Composite C Hubs 2pcs For FT1 FT1S XQ1 XQ1S XQ2S, XQ10, XQ10F

New and improved C Hubs V2. These will be direct upgrade also on the Execute XQ1 series, during testing it was found that these suspension pieces gave more corner speed! If you are upgrading from the rear uprights, you will need to purchase wishbones and...

Xpress

Aluminium 20T Centre Pulley Set A For EXECUTE XQ10

Aluminium centre pulley for the Execute XQ10, providing more durability at the expense of drivetrain efficiency. Recommended for use in high powered touring car racing classes. Feature: For: Xpress Execute XQ10 Material: Aluminum Colour:...

Xpress

Lower Suspension Mount Spacer 0.5mm For XQ2S XQ1S XQ1 XM1S XM1 FT1 FT1S XQ10

Further fine tune your roll centres with these easy to install spacer shims for your lower suspension mounts! Also included is a shim for the one-piece optional FR mount!   Feature: For: Xpress Execute XQ1S XQ1 XM1S XM1 FT1 FT1S XQ10 Material:...

Xpress

Aluminium 20T Center Pulley Set B For EXECUTE XQ10

Aluminium centre pulley for the Execute XQ10, providing more durability at the expense of drivetrain efficiency. Recommended for use in high powered touring car racing classes. Feature: For: Xpress Execute XQ10 Material: Aluminum Colour:...

Xpress

Composite Anti Tweak Battery Holder

Spring loaded anti tweak battery holders for the Execute series of cars! Highly adjustable for different types of batteries, including different height posts to use with either normal or LCG batteries! Without having to use tape, the chassis is not under...

Xpress

Graphite 3.0mm Front Flex Shock Tower XQ10

Shock towers for the Execute XQ10 which features a deep cut on the top of the shock tower, allowing for more flex in the bulkhead areas. Which translates into more corner speed, you can also tune your car by using a normal shock tower in the opposing end...

Xpress

Graphite 3.0mm Rear Flex Shock Tower XQ10

Shock towers for the Execute XQ10 which features a deep cut on the top of the shock tower, allowing for more flex in the bulkhead areas. Which translates into more corner speed, you can also tune your car by using a normal shock tower in the opposing end...

Xpress

Execute FM1S Aluminium Motor Mount

Original replacement part for Execute FM1S , keep spares ready so your race day isn't cut short! Feature: For: Xpress Execute FM1S Material: Aluminum Color: Red   Include: Aluminum Spur Gear Adaptor (1 pc)

Xpress

Execute XQ10 2.25MM High Flex Main Chassis Plate

Execute XQ10 2.25MM Graphite Mid Motor Main Chassis Plate

Xpress

Xpress Execute XQ10 Logo Sticker Decal A6 148x105mm #XP-30032

Xpress Execute XQ10 body decals! Comes with different size decals for use on the bonnet, sides and even wing endplates! Feature: For: 1/10 Touring Body Material: Vinyl Color: Black/White Decals Include: Decal Sheet (1 pc)