Arrow AT1 Upgrades

Xpress

Xpress AT1S Aluminium Anti-Roll Bar Kit 1.2mm 1.3mm 1.4mm

Anti-rollbar set for both Arrow AT1 and AT1S, comes with a full set of 1.2, 1.3 and 1.4mm rollbars for both front and rear.   Feature: For: Xpress Arrow AT1 AT1S Material: Plastic/Metal/Aluminium Include: Rollbars (6...

Factory Pro

Factory Pro Ceramic Ball Bearing 10x15x4mm (1 pcs)

Ceramic Bearings for most of the Xpress Range Feature: Material: Steel/Ceramic Colour: Silver   Include: Bearings (1 pcs)  

Factory Pro

Factory Pro Ceramic Ball Bearing 3x6x2.5mm (1pc)

Bearings for the steering for most of the Xpress Range Feature: Material: Steel/Ceramic Colour: Silver   Include: Bearings (1 pcs)  

Xpress

Graphite Propeller Shaft AT1 AT1S

Lightweight yet strong graphite centre drive shaft for use in either the Arrow AT1 or AT1S!   Feature: For: Arrow AT1 AT1S Material: Graphite/Aluminium Colour: Black/Red   Include: Graphite Shaft (1...

Xpress

Aluminium Battery Stopper

Aluminium battery stopper for the Arrow series, reinforcing the battery stopper by upgrading to aluminum!   Feature: For: Arrow AT1 AT1S Material: Aluminum Colour: Red   Include: Stopper (1 pc) Screw (1 pc) Spacer (1 pc) Washer...

Xpress

Graphite Spur Gear Mount Plate

Graphite upgrade spur gear mount pressure plate, offering more rigidity. Included are screws that must be used to keep the bearings in place.   Feature: For: Arrow AT1 Material: Graphite Colour: Black   Include: Spur Gear Mount...

Xpress

Arrow AT1 AT1S Shaft Driven Gear Differential Repair Parts

Replacement steel parts for the Gear Differential on the Arrow AT1 including the shims and screws.   Feature: For: Arrow AT1 Material: Steel Colour: Silver/Black   Include: Shims (7 pcs) Screws (6...

Xpress

Arrow AT1 AT1S 2.0mm Aluminium Chassis Plate (Lightweight)

Aluminium bottom chassis for Xpress Arrow AT1, used for in either High Grip Asphalt or Carpet. By adding more weight to the lowest point of the chassis, this increases stability and lowers the center of gravity!   Feature: For:...

Xpress

Aluminium 30mm Fan Mount AT1, AT1S

Replacement parts for the Xpress Arrow AT1S, genuine part for Xpress series of cars.   Feature: For: Arrow AT1S AT1 Material: Aluminum Colour: Black   Include: Fan Mount (1 pc)  

Xpress

Arrow AT1 AT1S 4mm Aluminium Shaft Driven Gear Differential Outdrive Adaptor

Aluminium light weight differential outdrive to reduce the weight of the drivetrain on your Arrow AT1! Allowing for a more efficient drivetrain resulting in better speeds! Note: Requires 4mm thickness blades #XP-10876...

Xpress

Steel Shaft Driven Spool Outdrive Adaptor 2mm Pin

Steel spool outdrives for replacing the kit composite outdrive, offering more durability at the expense of weight added to the drivetrain. Feature: For: Xpress AT1 Solid Axle Material: Steel Colour: Black Include: Steel Cup (2 pcs) *...

Xpress

Shaft Driven Solid Axle Set For Arrow AT1 AM1

Replacement drivetrain parts for the Arrow AT1, made with self lubricating material for a longer lasting drivetrain. Feature: For: Xpress Arrow AT1 Material: Self Lubricating Plastic Colour: Off-White   Include: Complete Solid Axle (1...

Xpress

Long Travel Short Shock Set V2

Updated short shock set for the Xpress AT1 Am1 XQ10 and XQ10F, a structural redesign which eeks out more travel and ride height adjustment for the car! The increased travel inherently generates more traction for your chassis, so you will be able to...

Xpress

Composite Rear Upright 2pcs V2 For Execute Series Touring

V2 of our rear uprights. We have further added more material to the hub for higher durability. **Note: If you are upgrading the suspension of XQ1 or XQ1S, you also need to purchase the 3.0mm outer suspension pins #XP-10602 and Hard Strong Front And Rear...

Xpress

Xpress V2 Strong Composite C Hubs 2pcs For FT1 FT1S XQ1 XQ1S XQ2S, XQ10, XQ10F

New and improved C Hubs V2. These will be direct upgrade also on the Execute XQ1 series, during testing it was found that these suspension pieces gave more corner speed! If you are upgrading from the rear uprights, you will need to purchase wishbones and...

Xpress

Execute Upper Deck Stiffener

Replacement part for the Mid Pulley Conversion kit for Execute XQ1! Install onto your topdeck to reduce chassis flex! Feature: For: Xpress Mid Pulley Conversion Kit XP-10483 Material: Aluminium Colour: Red Include: Upper Deck Stiffener (1...

Xpress

Execute XQ1 Graphite Upper Bumper Holder

Execute XQ1 Graphite Upper Bumper Holder Feature: For: Xpress Execute XQ1 XQ1S Material: Grahpite Colour: Black Include: Upper Bumper Holder (1 pc) Spacers (2 pcs) Screws (2 pcs)

Xpress

Aluminium Wheel Adapter 6mm 2pcs For K1 M1 D1 , TC & MTC

Larger offset wheel adapter in 6mm width for a large variety of cars! Feature: For: 1/10 Onroad Cars Material: Aluminium Colour: Red Include: Wheel Adapter 6mm (2 pcs)

Xpress

Shock X-Ring 1-pcs for XQ1 XQ10 XM1 FT1 FT1S

Redesigned X-Rings for smoother operation, with a revamped material choice which operates better in hot weather and longer laster! Feature: For: Xpress XQ1XQ10 XM1 FT1 FT1S Colour: Green

Xpress

On-power Control System V2 For XQ1 XQ1S FT1 FT1S XQ10

Change how your car behaves in the middle of the corner with the Xpress on-power Control System (XOC), adjust the angle with spacers to differ the toe-in change during suspension compression. Comes with special cut arms so you can adjust the wheelbase to...