-
Factory Pro
Factory Pro Ceramic Ball Bearing 10x15x4mm (1 pcs)
Ceramic Bearings for most of the Xpress Range Feature: Material: Steel/Ceramic Colour: Silver Include: Bearings (1 pcs)
£7.95 -
Factory Pro
Factory Pro Ceramic Ball Bearing 3x6x2.5mm (1pc)
Bearings for the steering for most of the Xpress Range Feature: Material: Steel/Ceramic Colour: Silver Include: Bearings (1 pcs)
£6.75 -
Xpress
Kevlar Drive Belt 3.5 x 528mm For Dragnalo DR1S
Replacement belt for the Dragnalo DR1S, specially designed formula for higher durability. Feature: For: Dragnalo DR1S Material: Kevlar Colour: Black Include: Belt (1 pc)
£8.95 -
Xpress
Graphite 3.0mm Rear Shock Tower (Short Shock) For Dragnalo DR1S
Graphite rear short shock tower for 1/10 Execute series of Touring Cars! Graphite providing better support over the original fibre offering. Feature: For: Xpress Execute XQ2S, Dragnalo DR1S Material: Graphite Colour: Black Include: Rear...
£22.50 -
Xpress
Aluminium Wide 20T Center Pulley For Dragnalo DR1S
Aluminium upgrade for Dragnalo DR1S's drivetrain pulley, this wide version drives the wide rear drive belt. Feature: For: Xpress Dragnalo DR1SMaterial: AluminumColour: Black/Red Include: Rear Belt Pulley (1 pc)
£22.50 -
Xpress
Aluminium 20T Center Pulley For Dragnalo DR1S
Aluminium upgrade for Dragnalo DR1S's drivetrain pulley, this thin version drives the narrow front drive belt. Feature: For: Xpress Dragnalo DR1S Material: Aluminium Colour: Black/Red Include: Front Belt Pulley (1 pc)
£19.95 -
Xpress
2.5mm Graphite 540 Motor Mount Plate For Dragnalo DR1S
Original replacement part for the Dragnalo DR1S, motor mount plate for mounting 1/8 sized motors. Feature: For: Dragnalo DR1S Material: Graphite Colour: Black Include: Motor Mount Plate (1 pc)
£15.50 -
Xpress
2.5mm Graphite 1/8 Motor Mount Plate For Dragnalo DR1S
Original replacement part for the Dragnalo DR1S, motor mount plate for mounting 1/8 sized motors. Feature: For: Dragnalo DR1S Material: Graphite Colour: Black Include: Motor Mount Plate (1 pc)
£15.50 -
Xpress
Hard Strong Front And Rear Composite Suspension Arms V2 For Execute Series Touring
New and improved suspension arms, in our hard material. These will be direct upgrade on the Execute series, during testing it was found that these suspension pieces gave more corner speed! Version 2 introduces an inner hole for mounting your rear shocks...
£8.95 -
Xpress
5.5mm Ball 10mm Thread 4pcs (longer gap between flange)
This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle. Feature: For: Xpress Shock Mounting Material: Steel Colour: Black Include: 5.5mm Ball Ends (4 pcs)
£7.50 -
Xpress
5.5mm Ball 8mm Thread 4pcs (longer gap between flange)
This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle. Feature: For: Xpress Shock Mounting Material: Steel Colour: Black Include: 5.5mm Ball Ends (4 pcs)
£7.50 -
Xpress
Hard Strong Composite V2 C Hub 4 Degree For Execute Series Touring
Updated C Hubs found on the Execute XQ2S #XP-90032 and can also be used in other Execute Touring cars when used in conjunction with 3.0mm outer suspension pin arms and the #XP-10401 C-hub king pin set! Feature: For: Xpress Execute XQ2S DR1S For...
£8.95 -
Factory Pro
Factory Pro 3mm Red Shim/Washer (10 pcs)
Factory Pro 3mm Red Shim/Washer (10 pcs) Material - Alloy Colour - Red 10 per pack
£6.95 -
Xpress
Alloy 5mm Wheel Hub Red (2 pcs) Xpress Cars
This is Xpress Aluminium 5mm Wheel Hub Red Pair, fits all shafts with 5mm axle. Genuine official replacement part from Xpress. Feature: For: Xpress Execute, Xpresso, GripXero Series. Material: Aluminium Color:...
£11.50 -
£14.50
-
Xpress
Alloy Shim 3x6x1.0mm Red 20pcs
This is Aluminium 3x5.5x1.0mm Shim 20 pieces pack, genuine official replacement part from Xpress. Feature: For: Xpress Execute Material: Aluminium Colour: Red Include: Aluminium Shim 3x5.5x1.0mm Red (20 pcs)
£15.50