XQ10 Spares

Xpress

Long Travel Short Shock Set V2

Updated short shock set for the Xpress AT1 Am1 XQ10 and XQ10F, a structural redesign which eeks out more travel and ride height adjustment for the car! The increased travel inherently generates more traction for your chassis, so you will be able to...

Xpress

Hard Strong Front And Rear Composite Suspension Arms V2 For Execute Series Touring

New and improved suspension arms, in our hard material. These will be direct upgrade on the Execute series, during testing it was found that these suspension pieces gave more corner speed! Version 2 introduces an inner hole for mounting your rear shocks...

Xpress

Hard Coated Universal Rear Dogbone 43mm 2pcs For Execute Series Touring

Aluminium universal shaft for replacing the rear steel driveshaft for a lighter and more efficient drivetrain. Feature: For: Xpress Execute 1/10 Touring Series Material: Aluminium Colour: Titanium   Include: Driveshafts (2...

Xpress

Graphite 2.0mm One Piece Top Deck For Execute XQ10F XQ10 FWD Conversion

For some specific tracks that require less chassis flex, this one piece top deck on your FWD Converted XQ10 will allow more control and stability whilst cornering in both low and high speed corners! It fits with XQ10F as well. Feature: For: Xpress...

Xpress

Composite Upper Deck Stiffener 2pcs For Execute Series Touring

Plastic upper deck stiffener for tune the flex of the top deck stiffer but not too stiff when using the aluminium version! Feature: For: Xpress Execute XQ2S FT1 FT1S XQ10 XQ10F Material: Composite Colour: Black Include: Composite Stiffeners...

Xpress

Aluminium 7075 Servo Horn 17-21mm 25T

Adjust the height of which your linkage connects to your servo horn easily with the slide-able mounting tab on this servo horn! Raise the height for a more aggressive responding car, whilst lower it for a more linear feel! Feature: For: 25T Servo...

Xpress

Aluminum 7075 Height Adjustable Servo Horn 17-21mm 23T

Adjust the height of which your linkage connects to your servo horn easily with the slide-able mounting tab on this servo horn! Raise the height for a more aggressive responding car, whilst lower it for a more linear feel! Feature: For: 23T Servo...

Xpress

2.25mm Graphite Main Chassis For XQ10F XQ10 FWD Conversion

Original replacement part for the Execute XQ10F and XQ10 FWD conversion Kit, keep spares ready so your race day won't cut short! Feature: For: Execute XQ10 FWD Conversion Kit #XP-10737 and XQ10F Material: Graphite Colour:...

Xpress

4.8mm Low Profile Ball End 13mm 4pcs

This is Execute XQ1 Execute 4.8mm Low Profile Ball End, genuine official replacement part from Xpress. Feature: For: Xpress Execute XQ1 Material: Plastic Colour: Black Include: Low Profile Ball End 13mm (4 pcs)

Xpress

Long Travel Short Shock Grey Composite Shock Parts

Replacement plastic shock parts for the V2 long travel short shock set #XP-10593, this is a direct upgrade for the stock shocks from the XQ2S.  It can still fit with original kit short shock from XQ10 and FM1S, but the shock length will be decrease...

Xpress

5.5mm Ball 10mm Thread 4pcs (longer gap between flange)

This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle. Feature: For: Xpress Shock Mounting Material: Steel Colour: Black Include: 5.5mm Ball Ends (4 pcs)

Xpress

5.5mm Ball 8mm Thread 4pcs (longer gap between flange)

This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle. Feature: For: Xpress Shock Mounting Material: Steel Colour: Black Include: 5.5mm Ball Ends (4 pcs)

Xpress

King Pin Set 2+2 For Execute V2 Strong C-hub

Replacement King pin for the new V2 Strong C-Hub found on the Execute XQ2S DR1S, be sure to keep a set in your parts bag or when you're upgrading from the old C Hubs! Note: To use this new collar with other touring chassis in the Execute series,...

Xpress

Low Profile Bumper Body Post Set V2

Newly designed bumper pieces and body posts to be used with the low profile bumper foam XP-10562. Included are two bodypost mounts to rotate the rear mounting by 90 degrees, to mount the body posts parallel to the chassis.   Note: The bumper parts...

Xpress

Factory Pro Silicone Gear Differential O-Ring (5x8, 8pcs)

Factory Pro Silicone Gear Differential O-Ring (5x8, 8pcs)

Xpress

Composite Upper Deck Collar For Flex Elimination For XQ10 FM1S

Plastic Upper Deck Collar which allows you to control the flex on either end of your car. This part is ready for use in XQ2S, XQ10F and FM1S out of box. If you are upgrading the XQ10, XQ1/ XQ1S, FT1 / FT1S, you need to use also the: 2.0mm Graphite...

X-Square

X-Square Steel Spool Outdrive Adapter 2pcs For XQ1 XQ1S XQ2S XM1 XM1S XQ10

Replacement part for the Execute XQ10, will also fit the composite spool housing (#XP-10264). Feature: For: Xpress Execute XQ10 XQ1 XQ1S XM1 XM1S Material: Steel Colour: Black Include: Outdrive Adapter Cups (2 pcs)

Xpress

Xpress V2 Strong Composite C Hubs 2pcs For FT1 FT1S XQ1 XQ1S XQ2S, XQ10, XQ10F

New and improved C Hubs V2. These will be direct upgrade also on the Execute XQ1 series, during testing it was found that these suspension pieces gave more corner speed! If you are upgrading from the rear uprights, you will need to purchase wishbones and...

Xpress

Xpress Execute XQ10 Logo Sticker Decal A6 148x105mm #XP-30032

Xpress Execute XQ10 body decals! Comes with different size decals for use on the bonnet, sides and even wing endplates! Feature: For: 1/10 Touring Body Material: Vinyl Color: Black/White Decals Include: Decal Sheet (1 pc)

Xpress

Button Head Hex Screw 3x18mm 10pcs

Button Head Hex Screw 3x18mm 10pcs Feature: For: Execute XQ1 XQ1S Material: Steel Colour: Black Include: Screws (10 pcs)