-
Xpress
Aluminium Motor Mount For Mid Motor Conversion Kit XP-10625
Replacement part for the Mid Motor Conversion kit for Execute XQ1! Feature: For: Xpress Mid Motor Conversion Kit XP-10625 Material: Aluminium Colour: Black Include: Aluminium Mid Motor Mount (1 pc)
£28.50 -
Xpress
Long Travel Short Shock Set V2
Updated short shock set for the Xpress AT1 Am1 XQ10 and XQ10F, a structural redesign which eeks out more travel and ride height adjustment for the car! The increased travel inherently generates more traction for your chassis, so you will be able to...
£33.50 -
Xpress
Hard Strong Front And Rear Composite Suspension Arms V2 For Execute Series Touring
New and improved suspension arms, in our hard material. These will be direct upgrade on the Execute series, during testing it was found that these suspension pieces gave more corner speed! Version 2 introduces an inner hole for mounting your rear shocks...
£8.95 -
Xpress
Hard Coated Universal Rear Dogbone 43mm 2pcs For Execute Series Touring
Aluminium universal shaft for replacing the rear steel driveshaft for a lighter and more efficient drivetrain. Feature: For: Xpress Execute 1/10 Touring Series Material: Aluminium Colour: Titanium Include: Driveshafts (2...
£22.50 -
Xpress
Composite Upper Deck Stiffener 2pcs For Execute Series Touring
Plastic upper deck stiffener for tune the flex of the top deck stiffer but not too stiff when using the aluminium version! Feature: For: Xpress Execute XQ2S FT1 FT1S XQ10 XQ10F Material: Composite Colour: Black Include: Composite Stiffeners...
£5.50 -
Xpress
Aluminium 7075 Servo Horn 17-21mm 25T
Adjust the height of which your linkage connects to your servo horn easily with the slide-able mounting tab on this servo horn! Raise the height for a more aggressive responding car, whilst lower it for a more linear feel! Feature: For: 25T Servo...
£20.00 -
Xpress
Aluminum 7075 Height Adjustable Servo Horn 17-21mm 23T
Adjust the height of which your linkage connects to your servo horn easily with the slide-able mounting tab on this servo horn! Raise the height for a more aggressive responding car, whilst lower it for a more linear feel! Feature: For: 23T Servo...
£20.00 -
Xpress
Aluminum 20T Center Layshaft Pulley For Execute XQ1 XQ2S XQ1S XM1 XM1S FT1 FT1S
Aluminium upgrade pulley for Xpress sport series of cars, upgrade on the durability at the cost of a heavier drivetrain. Feature: For: Execute XQ1 XQ2S XQ1S XM1 XM1S FT1 FT1S Material: Aluminium Colour:...
£15.50 -
Xpress
Long Travel Short Shock Grey Composite Shock Parts
Replacement plastic shock parts for the V2 long travel short shock set #XP-10593, this is a direct upgrade for the stock shocks from the XQ2S. It can still fit with original kit short shock from XQ10 and FM1S, but the shock length will be decrease...
£9.95 -
Xpress
Composite Wheel Hub Hex Set 4pcs For Execute
Execute XQ1S XQ2S XM1S FT1S FM1S genuine official replacement part from Xpress. Feature: For: Xpress Execute XQ1S XQ2S XM1S FT1S FM1S Material: Plastic Colour: Black Include: Wheel Hex (4 pcs) Wheel Hex Pins (4 pcs)
£5.50 -
Xpress
Composite Rear Upright 2pcs V2 For Execute Series Touring
V2 of our rear uprights. We have further added more material to the hub for higher durability. **Note: If you are upgrading the suspension of XQ1 or XQ1S, you also need to purchase the 3.0mm outer suspension pins #XP-10602 and Hard Strong Front And Rear...
£8.95 -
Xpress
5.5mm Ball 10mm Thread 4pcs (longer gap between flange)
This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle. Feature: For: Xpress Shock Mounting Material: Steel Colour: Black Include: 5.5mm Ball Ends (4 pcs)
£7.50 -
Xpress
5.5mm Ball 8mm Thread 4pcs (longer gap between flange)
This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle. Feature: For: Xpress Shock Mounting Material: Steel Colour: Black Include: 5.5mm Ball Ends (4 pcs)
£7.50 -
Xpress
Graphite 3.0MM Rear Short Shock Tower For EXECUTE XQ1 XQ1S XQ2S
Run short shocks (#XP-10593) on your Execute XQ1 XQ1S or XQ2S! With short shocks you get more stability through corners which results in more consistent laptimes! **Note: For XQ1 and XQ1S, need to use with Execute XQ10 Short Shock Set V2 Long Travel...
£19.95 -
Xpress
Hard Strong Composite V2 C Hub 4 Degree For Execute Series Touring
Updated C Hubs found on the Execute XQ2S #XP-90032 and can also be used in other Execute Touring cars when used in conjunction with 3.0mm outer suspension pin arms and the #XP-10401 C-hub king pin set! Feature: For: Xpress Execute XQ2S DR1S For...
£8.95 -
Xpress
Low Profile Bumper Body Post Set V2
Newly designed bumper pieces and body posts to be used with the low profile bumper foam XP-10562. Included are two bodypost mounts to rotate the rear mounting by 90 degrees, to mount the body posts parallel to the chassis. Note: The bumper parts...
£9.50 -
Xpress
FRP 2.0mm Top Deck V2 For Execute XQ2S XQ1S
Replacement top deck for the Execute XQ2S, which can also be used on the XQ1S to introduce the flex elimination system to the car! Feature: For: Xpress Execute XQ1S XQ2S Material: FRP Coluor: Black Include: Top Deck (1 pc)
£10.95 -
Xpress
Execute Mid Mount FWD Conversion Kit 2.0mm FRP Top Deck Rear
Replacement part for the Mid Mount FWD XQ2S conversion kit #XP-10829 Feature: For: Execute XQ2S Mid Mount FWD Conversion Kit #XP-10829 Material: FRP Color: Black Include: Rear Top Deck (1 pc)
£7.50 -
Xpress
Execute XQ2S Mid Mount FWD Conversion Kit 3.0mm FRP Servo Mount Plate
Replacement part for the Mid Mount FWD XQ2S conversion kit #XP-10829. It also fit with XQ10F but the servo mount plate out of box from XQ10F was made by carbon fiber. Feature: For: Execute XQ2S Mid Mount FWD Conversion Kit #XP-10829 Material:...
£7.50 -
Xpress
Xpress Execute V2 XQ2S XQ1S XM1S Front and Rear Composite One Piece Upper Clamp
Replacement upper bulkhead set for the Execute XQ2S. Can also be installed into other sport series cars, which allows the adjustment of high or low differential position! Feature: For: Xpress Execute XQ2S XQ1S FT1S FM1S Material:...
£11.95