-
Xpress
RC Ceramic PTFE Bearing (3x6x2.5mm) 10pcs
RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings...
£27.95 -
Xpress
RC Ceramic Bearing (10x15x4mm) 10pcs
Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer...
£29.95 -
Xpress
RC Ceramic PTFE Bearing (10x15x4mm) 10pcs
Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock...
£29.95 -
Xpress
Separate Bulkhead FR/RL (Low Anti-Roll Bar) For Arrow AT1 AM1
Replacement parts for the Xpress Arrow AT1, genuine part for Xpress series of cars. Feature: For: Xpress Arrow AT1 AM1 Material: Aluminium Colour: Black Include: Separate Bulkhead (1 pc)
£22.50 -
Xpress
Separate Bulkhead - FL/RR (Low Anti-Roll Bar) For Arrow AT1
Replacement parts for the Xpress Arrow AT1, genuine part for Xpress series of cars. Feature: For: Arrow AT1 Material: Aluminum Colour: Black Include: Bulkhead (1 pc)
£22.50 -
Xpress
Strong Composite Suspension Parts Set V2 For Execute Series
New and improved suspension arms. These will be direct upgrade on the Execute series, during testing it was found that these suspension pieces gave more corner speed! Version 2 introduces an inner hole for mounting your rear shocks onto for a even more...
£34.95 -
Xpress
Hard Coated Universal Rear Dogbone 43mm 2pcs For Execute Series Touring
Aluminium universal shaft for replacing the rear steel driveshaft for a lighter and more efficient drivetrain. Feature: For: Xpress Execute 1/10 Touring Series Material: Aluminium Colour: Titanium Include: Driveshafts (2...
£22.50 -
X-Square
X-Square Rear Low Profile Shock Mount Upper Bulkhead For Xpress Execute XQ10 XQ1S XQ2S
Integrated shock mount upper bulkhead to lower the centre of gravity of your Xpress XQ10! This results in a more flat cornering response increasing consistency! Also with super minute shock angle adjustment through adding/removing...
£34.50 -
X-Square
X-Square Front Low Profile Shock Mount Upper Bulkhead For Xpress Execute XQ10 XQ1S XQ2S
Integrated shock mount upper bulkhead to lower the centre of gravity of your Xpress XQ10! This results in a more flat cornering response increasing consistency! Also with super minute shock angle adjustment through adding/removing...
£24.50 -
Xpress
Aluminium Adjustable Ackermann Steering Plate For Execute Sport Series
Type a description for this product here...
£22.50 -
Xpress
Sports Composite Short Shock Set 2pcs
Short shock sets as same as the original ones that came with the Execute XQ2S, will also fit other Xpress series cars with short shock towers installed! For XQ1, XQ1S and XQ2S, please use: FRP 3.0mm Front Short Shock Tower #XP-10791 and FRP 3.0mm...
£21.50 -
Yeah Racing
Titanium Turnbuckle set for Xpress Execute XQ1 XQ1S
Yeah Racing Titanium Turnbuckle set for Xpress Execute XQ1 XQ1S Description: Upgrade the Servo Link, Camber link and steering linkages to titanium with this value set! Feature: For: Xpress XQ1 XQ1S/li> Material: 64 Titanium Colour:...
£22.50 -
Xpress
Anti Tweak Battery Holder For Execute XQ1 XQ1S XQ1 XM1S XM1 FT1 FT1S XQ10 FM1S
Hate tape? Use this free float battery mount for you Execute series of cars! By removing the need for battery tape, it removes the unwanted tweak generated when applied across the battery. Your choice of using the supplied tabs or...
£28.50 -
X-Square
Aluminium FR Spilt Suspension Mount Set For Xpress XQ1 XQ1S XM1 XM1S FT1 FT1S XQ10
Easily test setup of a solid and split FR mount on your Xpress touring car with this suspension mount setup. Remove the stiffening bar with a ball-stud 2.0mm hex tool and you will have split blocks! This changes the flex in the FR suspension block area...
£37.50 -
Xpress
Xpress Strong Composite Suspension Parts Set For FT1 XQ1 XQ1S
New and improved suspension arms. These will be direct upgrade also on the Execute XQ1 series, during testing it was found that these suspension pieces gave more corner speed! If you are upgrading from the old set of suspension arms, you will need to...
£35.95 -
X-Square
X-Square Alloy Split Front Upper Clamp Left and Right For Xpress XQ1 XQ1S XM1S
Alloy split front upper clamp for Execute XQ1 XQ1S XM1S XM1! Alloy split upper bulkheads for Xpress's Execute series of cars, split bulkheads will allow for more chassis flex and will prove as a powerful tuning tool! Feature : For: Xpress Execute...
£27.50 -
X-Square
X-Square Alloy Split Lower Bulkhead Left and Right For Xpress XQ1 XQ1S XM1S
Alloy lower upgrade bulkheads for Execute XQ1 XQ1S XM1S XM1, upgrade from plastic to alloy to get more flex and consistent grip on bumpy tracks or in high temperatures! A sleek black CNC cut aluminium with high shine silver edges! Feature...
£32.50 -
Xpress
Execute XQ1 Brass Chassis Balancing Weights 10g 5g (4pcs)
Brass made balancing weights which screw onto the chassis of the Execute XQ1 and secured in place with another locking pin. *Photos for reference only. Feature: For: Execute XQ1 Material: Brass Colour: Gold/Black Include: Front 10g...
£29.50 -
Yeah Racing
Xpress 30mm Windmill Alloy Case ESC Cooling Fan
Cool your ESC in hot temperatures with this aluminium cased fan, with the casing made from aluminium which will allow for it to act as a heatsink as well to help dissapate heat! Feature: For: ESC with 30mm mounting holes Material: Aluminum Colour:...
£22.50 -
£27.50