-
Xpress
Execute FM1S 239mm Wheelbase 2mm Graphite Rear Top Deck
Convert your Execute FM1S to 239mm wheelbase, which results in the most stable handling car for extremely high or low grip conditions. By having such a long wheelbase, you car will be very stable throughout the corner. Note: To be used with the 239mm...
£15.50 -
Xpress
Execute FM1S 225mm Wheelbase 2mm Graphite Rear Top Deck
Convert your Execute FM1S to 225mm wheelbase, which results in a more stable car but sacrificing some steering. Graphite decks also provide more consistent handling when compared to the glass fiber. Note: To be used with the 225mm wheelbase chassis plate...
£15.50 -
Xpress
Composite Wheel Hub Hex Set 4pcs For Execute
Execute XQ1S XQ2S XM1S FT1S FM1S genuine official replacement part from Xpress. Feature: For: Xpress Execute XQ1S XQ2S XM1S FT1S FM1S Material: Plastic Colour: Black Include: Wheel Hex (4 pcs) Wheel Hex Pins (4 pcs)
£5.50 -
Xpress
Aluminium Upper Shock Cap For Execute XQ1S XM1S FT1S FM1S
Execute XQ1S XM1S FT1S FM1S genuine official replacement part from Xpress. Feature: For: Xpress Execute XQ1S XM1S FT1S FM1S Material: Aluminium Colour: Red Include: Aluminium Upper Shock Cap (2 pcs)
£4.50 -
Xpress
5.5mm Ball 10mm Thread 4pcs (longer gap between flange)
This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle. Feature: For: Xpress Shock Mounting Material: Steel Colour: Black Include: 5.5mm Ball Ends (4 pcs)
£7.50 -
Xpress
5.5mm Ball 8mm Thread 4pcs (longer gap between flange)
This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle. Feature: For: Xpress Shock Mounting Material: Steel Colour: Black Include: 5.5mm Ball Ends (4 pcs)
£7.50 -
Xpress
Motor Mount Post With Flange For Execute FM1S
Original replacement part for Execute FM1S and XQ10F, keep spares ready so your race day won't cut short! Feature: For: Xpress Execute FM1S XQ10F Material: Aluminium Colour: Red Include: Aluminium Motor Mount Flanged Post (1 pc)
£8.50 -
Xpress
Low Profile Bumper Body Post Set V2
Newly designed bumper pieces and body posts to be used with the low profile bumper foam XP-10562. Included are two bodypost mounts to rotate the rear mounting by 90 degrees, to mount the body posts parallel to the chassis. Note: The bumper parts...
£9.50 -
Xpress
Composite Steering Set For Execute Series
Original replacement part for the Execute XQ1S, XM1S, and FM1S, keep spares ready so your race day won't cut short! **Note: The side servo mount does not fit on FM1S, please use FM1S Composite Side Servo Mount #XP-10741 Feature For: Xpress Execute...
£9.95 -
Xpress
FRP 4mm Servo Mount Spacer For Execute FM1S
Original replacement part for Execute FM1S, keep spares ready so your race day won't cut short! Feature: For: Xpress Execute FM1S Material: FRP Colour: Black Include: FRP Servo Mount Spacer (1 pc)
£4.50 -
Xpress
Flanged Bearing 3x6x2.5mm 2pcs For Execute Flex Elimination Upper Deck
3x6x2.5mm flanged bearing, for use in Execute Flex Elimination Upper Deck adjustment area.The Flex Eliminator Upper Deck comes out of box from the XQ2S, FM1S and XQ10F kits.If use with XQ10, please use with 2.0mm Graphite Upper Deck For Flex Elimination...
£5.50 -
Xpress
Composite Upper Deck Collar For Flex Elimination For XQ10 FM1S
Plastic Upper Deck Collar which allows you to control the flex on either end of your car. This part is ready for use in XQ2S, XQ10F and FM1S out of box. If you are upgrading the XQ10, XQ1/ XQ1S, FT1 / FT1S, you need to use also the: 2.0mm Graphite...
£6.95 -
Xpress
Light Foam Bumper For Execute FM1S
Original replacement part for Execute FM1S , keep spares ready so your race day isn't cut short! Feature: For: Xpress Execute FM1S Material: Foam Colour: Black Include: Foam Bumper (1 pc)
£6.50 -
Xpress
Bando Upgrade Kevlar Drive Belt 3x249mm For Execute FM1S XQ10 FWD Conversion
Upgrade Bando belts for the Xpress Execute FM1S and XQ10 FWD Conversion Kit, for higher efficiency in your drivetrain! Feature: For: Xpress Execute FM1S, XQ10 FWD Conversion Material: Kevlar Colour: Black Include: Belt (1...
£8.95 -
Xpress
Lower Suspension Mount Spacer 0.5mm For XQ2S XQ1S XQ1 XM1S XM1 FT1 FT1S XQ10
Further fine tune your roll centres with these easy to install spacer shims for your lower suspension mounts! Also included is a shim for the one-piece optional FR mount! Feature: For: Xpress Execute XQ1S XQ1 XM1S XM1 FT1 FT1S XQ10 Material:...
£14.50 -
Xpress
Graphite 3.0MM Front Short Shock Tower For EXECUTE XM1 XM1S FM1S
Graphite upgrade for our Execute M-Chassis Mini cars, for our XM1, you will be able to run our V2 Short Shock set (#XP-10593) to get a even better handling car! Feature: For: Xpress Execute XM1 XM1S FM1S Material: Graphite Colour:...
£16.50 -
Xpress
Composite Anti Tweak Battery Holder
Spring loaded anti tweak battery holders for the Execute series of cars! Highly adjustable for different types of batteries, including different height posts to use with either normal or LCG batteries! Without having to use tape, the chassis is not under...
£15.50 -
Xpress
Execute FM1S Apur Gear Adaptor
Original replacement part for Execute FM1S , keep spares ready so your race day isn't cut short! Feature: For: Xpress Execute FM1S Material: Aluminum Color: Red Include: Aluminum Spur Gear Adaptor (1 pc)
£8.50 -
Xpress
Aluminium 30mm Fan Mount For Execute FM1S XQ10 FWD
Fan mount for 30mm fans to mount neatly underneath the servo mount plate on the FM1S, leaves you with more space to mount your electronics on the small m-chassis! Feature: For: Xpress Execute FM1S, XQ10 FWD Material: Aluminium Color:...
£14.50 -
Xpress
Execute FM1S 2.0mm Graphite Front Top Deck
Optional Graphite Top deck for the Execute FM1S, giving you better performance at high temperature tracks! Feature: For: Xpress Execute FM1S Material: Graphite Colour: Black Include: Top Deck (1 pc)
£12.50