XQ10F Parts

Xpress

Composite Wheel Hub Hex Set 4pcs For Execute

Execute XQ1S XQ2S XM1S FT1S FM1S genuine official replacement part from Xpress. Feature: For: Xpress Execute XQ1S XQ2S XM1S FT1S FM1S Material: Plastic Colour: Black Include: Wheel Hex (4 pcs) Wheel Hex Pins (4 pcs)

Xpress

Composite Rear Upright 2pcs V2 For Execute Series Touring

V2 of our rear uprights. We have further added more material to the hub for higher durability. **Note: If you are upgrading the suspension of XQ1 or XQ1S, you also need to purchase the 3.0mm outer suspension pins #XP-10602 and Hard Strong Front And Rear...

Xpress

5.5mm Ball 10mm Thread 4pcs (longer gap between flange)

This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle. Feature: For: Xpress Shock Mounting Material: Steel Colour: Black Include: 5.5mm Ball Ends (4 pcs)

Xpress

5.5mm Ball 8mm Thread 4pcs (longer gap between flange)

This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle. Feature: For: Xpress Shock Mounting Material: Steel Colour: Black Include: 5.5mm Ball Ends (4 pcs)

Xpress

Hard Strong Composite V2 C Hub 4 Degree For Execute Series Touring

Updated C Hubs found on the Execute XQ2S #XP-90032 and can also be used in other Execute Touring cars when used in conjunction with 3.0mm outer suspension pin arms and the #XP-10401 C-hub king pin set! Feature: For: Xpress Execute XQ2S DR1S For...

Xpress

King Pin Set 2+2 For Execute V2 Strong C-hub

Replacement King pin for the new V2 Strong C-Hub found on the Execute XQ2S DR1S, be sure to keep a set in your parts bag or when you're upgrading from the old C Hubs! Note: To use this new collar with other touring chassis in the Execute series,...

Xpress

Low Profile Bumper Body Post Set V2

Newly designed bumper pieces and body posts to be used with the low profile bumper foam XP-10562. Included are two bodypost mounts to rotate the rear mounting by 90 degrees, to mount the body posts parallel to the chassis.   Note: The bumper parts...

Xpress

Flanged Bearing 3x6x2.5mm 2pcs For Execute Flex Elimination Upper Deck

3x6x2.5mm flanged bearing, for use in Execute Flex Elimination Upper Deck adjustment area.The Flex Eliminator Upper Deck comes out of box from the XQ2S, FM1S and XQ10F kits.If use with XQ10, please use with 2.0mm Graphite Upper Deck For Flex Elimination...

Xpress

Aluminium Anti-Roll Bar Bushing For Execute XQ1 XQ10 FT1 XQ10F XM1

Aluminium Anti-Roll Bar Bushing, genuine official replacement part from Xpress. Included are two pieces that can be inserted into the bulkhead or attaches to the end of the roll bar. Feature: For: Execute XQ1 FT1 XM1 XQ10 XQ10F Material:...

Xpress

Composite Upper Deck Collar For Flex Elimination For XQ10 FM1S

Plastic Upper Deck Collar which allows you to control the flex on either end of your car. This part is ready for use in XQ2S, XQ10F and FM1S out of box. If you are upgrading the XQ10, XQ1/ XQ1S, FT1 / FT1S, you need to use also the: 2.0mm Graphite...

Xpress

Execute FM1S Center Pulley Post

Optional part for Execute FM1S , reduce the weight on the front tires with this slightly lighter part.   Feature: For: Xpress Execute FM1S Material: Brass Colour: Brass    Include: 31g Brass Front Bumper (1 pc)  

Xpress

Bando Upgrade Kevlar Drive Belt 3x249mm For Execute FM1S XQ10 FWD Conversion

Upgrade Bando belts for the Xpress Execute FM1S and XQ10 FWD Conversion Kit, for higher efficiency in your drivetrain!   Feature: For: Xpress Execute FM1S, XQ10 FWD Conversion Material: Kevlar Colour: Black   Include: Belt (1...

Xpress

Xpress V2 Strong Composite C Hubs 2pcs For FT1 FT1S XQ1 XQ1S XQ2S, XQ10, XQ10F

New and improved C Hubs V2. These will be direct upgrade also on the Execute XQ1 series, during testing it was found that these suspension pieces gave more corner speed! If you are upgrading from the rear uprights, you will need to purchase wishbones and...

Xpress

Lower Suspension Mount Spacer 0.5mm For XQ2S XQ1S XQ1 XM1S XM1 FT1 FT1S XQ10

Further fine tune your roll centres with these easy to install spacer shims for your lower suspension mounts! Also included is a shim for the one-piece optional FR mount!   Feature: For: Xpress Execute XQ1S XQ1 XM1S XM1 FT1 FT1S XQ10 Material:...

Xpress

Composite Anti Tweak Battery Holder

Spring loaded anti tweak battery holders for the Execute series of cars! Highly adjustable for different types of batteries, including different height posts to use with either normal or LCG batteries! Without having to use tape, the chassis is not under...

Xpress

Execute FM1S Apur Gear Adaptor

Original replacement part for Execute FM1S , keep spares ready so your race day isn't cut short! Feature: For: Xpress Execute FM1S Material: Aluminum Color: Red   Include: Aluminum Spur Gear Adaptor (1 pc)

Xpress

Aluminium 30mm Fan Mount For Execute FM1S XQ10 FWD

Fan mount for 30mm fans to mount neatly underneath the servo mount plate on the FM1S, leaves you with more space to mount your electronics on the small m-chassis! Feature: For: Xpress Execute FM1S, XQ10 FWD Material: Aluminium Color:...

Xpress

Execute FM1S 2.0mm Graphite Front Top Deck

Optional Graphite Top deck for the Execute FM1S, giving you better performance at high temperature tracks! Feature: For: Xpress Execute FM1S Material: Graphite Colour: Black   Include: Top Deck (1 pc)

Xpress

Xpress Execute XQ10 Logo Sticker Decal A6 148x105mm #XP-30032

Xpress Execute XQ10 body decals! Comes with different size decals for use on the bonnet, sides and even wing endplates! Feature: For: 1/10 Touring Body Material: Vinyl Color: Black/White Decals Include: Decal Sheet (1 pc)

Factory Pro

Factory Pro Belt Tensioner / Fan Mount Red

Factory Pro replacement belt tensioner and fan mount. Add a bit of bling to your touring car and MTC pr M chassis. This handy little mount will take an M3 screw and allow you to mount a fan to your chassis or top deck.  It also replaces the kit...