-
Xpress
On-power Control System V2 0 Deg Aluminium C-hub 2pcs For Execute Series Touring
This is the replacement part for the suspension arm from the On-power Control System V2 #XP-10641. On-power Control System changes how your car behaves in the middle of the corner, adjust the angle with spacers to differ the toe-in change during...
£45.00 -
Xpress
Aluminium C-hub 4 Deg 2pcs For On-power Control System V2
Positive caster angle rear C-Hubs for our On-Power Control System V2 #XP-10641, adding on-power stability to the rear. Whilst also shortening the wheelbase which can be handy when running 0 arm sweep. Also included are the new kingpin sets which are...
£45.00 -
Xpress
Aluminium C-hub 2 Deg 2pcs For On-power Control System V2
Positive caster angle rear C-Hubs for our On-Power Control System V2 #XP-10641, adding on-power stability to the rear. Whilst also shortening the wheelbase which can be handy when running 0 arm sweep. Also included are the new kingpin sets which are...
£45.00 -
Xpress
Execute FM1S 239mm Wheelbase 2.25mm Graphite Main Chassis
Convert your Execute FM1S to 239mm wheelbase, which results in the most stable handling car for extremely high or low grip conditions. By having such a long wheelbase, you car will be very stable throughout the corner. Feature: For: Execute...
£69.95 -
Xpress
Execute FM1S 225mm 2.25mm Graphite Main Chassis Plate
Convert your Execute FM1S to 225mm wheelbase, which results in a more stable car but sacrificing some steering. Graphite decks also provide more consistent handling when compared to the glass fibre. Feature: For: Execute FM1S Material:...
£69.95 -
X-Square
X-Square Rear Low Profile Shock Mount Upper Bulkhead For Xray T4 20 21
Integrated shock mount upper bulkhead to lower the centre of gravity of your Xray T4 20 and 21! This results in a more flat cornering response increasing consistency! Also with super minute shock angle adjustment through adding/removing shims! You can...
£54.50 -
X-Square
X-Square Front Low Profile Shock Mount Upper Bulkhead For Xray T4 20 21
Integrated shock mount upper bulkhead to lower the centre of gravity of your Xray T4 20 and 21! This results in a more flat cornering response increasing consistency! Also with super minute shock angle adjustment through adding/removing shims! You can...
£49.50 -
Xpress
Xpress Alloy 2mm Bottom Chassis Plate 210mm FM1S
Aluminium bottom chassis for Execute FM1S, used for in either High Grip Asphalt or Carpet. By adding more weight to the lowest point of the chassis, this increases stability and lowers the centre of gravity! Feature: For: Xpress Execute...
£67.50 -
Xpress
2mm Aluminium Main Chassis Plate For Execute XQ1 XQ1S XQ2S
Aluminium bottom chassis for Execute XQ2S, used for in either High Grip Asphalt or Carpet. By adding more weight to the lowest point of the chassis, this increases stability and lowers the center of gravity! It also fits with XQ1 and XQ1S...
£65.00 -
Xpress
2.25mm Graphite Main Chassis Plate For Execute XQ2S XQ1S
Optional Graphite Chassis plate for the Execute XQ2S and XQ1S, giving you better performance at high temperature tracks and provides more consistent handling when compared to the stock chassis. Feature: For: Xpress Execute XQ2S...
£69.50 -
Xpress
EXECUTE XQ2S Mid Mount Fwd Conversion Kit
FWD Conversion kit for the Xpress Execute XQ2S and XQ1S, FWD drivetrain combined with a centre of gravity shifted towards the center. By moving the pulley, the motor has been moved forwards as well putting more weight forwards and changing the weight...
Was: £94.50Now: £69.95 -
Xpress
Execute FM1S 2.25mm Graphite Main Chassis
For some specific tracks that require less chassis flex, this one piece top deck will allow more control and stability whilst cornering in both low and high speed corners! Feature: For: Xpress Execute FM1S Material: Graphite Colour:...
£69.50 -
Xpress
Xpress Execute XQ1S XQ2S Mid Pulley Conversion Kit
Performance upgrade kit for the Xpress Execute XQ1S, the pulley has been moved to the middle of the drivetrain. What this results in is equal length belts for both the front and rear, resulting in almost equal power delivery to both ends of the car...
Was: £95.00Now: £75.00 -
Xpress
Graphite 2.25mm Flex Bottom Chassis Plate For XM1 XM1S
Introduce flex to your XM1 chassis by using 2.25mm chassis ! By using a different cut rather than thinner materials, durability is not sacrificed! Feature: For: Xpress Execute XM1 XM1S Material: Graphite Colour: Black Include: High...
£65.00 -
Xpress
225mm Wheelbase Graphite 2.25mm Main Chassis Plate For XM1 XM1S
Spare chassis plate for Xpress Execute XM1 with the 225mm conversion kit Feature: For: Xpress Material: Graphite Colour: Black Include: 225mm Wheelbase Chassis Plate (1 pc)
£59.95 -
Xpress
2.25mm Graphite Main Chassis Plate 239mm For Execute XM1 XM1S
Spare chassis plate for Xpress Execute XM1 with the 239mm conversion kit! Feature: For: Xpress Execute XM1 XM1S Material: Graphite Colour: Black Include: 2.25mm Graphite Main Chassis Plate 239mm (1 pc)
£67.50 -
Xpress
On-power Control System V2 For XQ1 XQ1S FT1 FT1S XQ10
Change how your car behaves in the middle of the corner with the Xpress on-power Control System (XOC), adjust the angle with spacers to differ the toe-in change during suspension compression. Comes with special cut arms so you can adjust the wheelbase to...
£67.50 -
X-Square
X-Square Spring Steel Double Joint Driveshaft 41mm for Xray T2/T3 /T4 XPRESS FT1S/FT1/XQ1/XQ1S
Smoothen your car's cornering with these Double Jointed Driveshafts by X-Square! Compared to traditional single jointed drive shafts, by having double joints the angle of the universal at full steering lock is reduced, which in turn reduces the chatter...
£42.50 -
Xpress
Xpress Execute XQ1 Mid Motor Conversion Aluminum Chassis Plate XP-10625 XP-10495 #XP-10633
Aluminium bottom chassis for use in conjunction with the Execute XQ1 mid conversion kit, used for in either High Grip Asphalt or Carpet. By adding more weight to the lowest point of the chassis, this increases stability and lowers the center of...
£75.00 -
Xpress
Xpress Spring Steel Double Joint Universal Shaft 2pcs For Execute XM1 XM1S
Spring steel double jointed universals with a replaceable pin to exchange when worn out! Smoother cornering when compared to traditional single jointed universals! Fits XM1 & XM1S * These are designed for the XM1 and it is...
£45.00