Car Spare Parts

Xpress

Execute XQ1S XM1S Aluminium Motor Mount

Execute XQ1S XM1S genuine official replacement part from Xpress. Feature: For: Xpress Execute XQ1S XM1S Material: Aluminium Colour: Red/Black Include: Aluminium Motor Mount Plate (1 pc) Motor Mount Pole Mount (1 pc)

Xpress

Composite Layshaft Bulkhead For Execute XQ1S XQ2S XM1S

Execute XQ1S XQ2S XM1S genuine official replacement part from Xpress. Feature: For: Xpress Execute XQ1S XQ2S XM1S Material: Plastic Colour: Black Include: Composite Layshaft (1 pc)

Xpress

Strong Front And Rear Composite Suspension Arms V2 For Execute Series Touring

New and improved suspension arms. These will be direct upgrade on the Execute series, during testing it was found that these suspension pieces gave more corner speed! Version 2 introduces an inner hole for mounting your rear shocks onto for a even more...

Xpress

Progressive Long Travel Aluminium Short Shock Body 2pcs For XQ10 XQ10F

Progressive diameter shock bodies for the Execute XQ10 XQ10F or Long Travel V2 dampers! Featuring a more narrow opening at the top resulting in more resistance at the end of the travel. This will translate in a more aggressive car at turn in whilst more...

Xpress

On-power Control System V2 0 Deg Aluminium C-hub 2pcs For Execute Series Touring

This is the replacement part for the suspension arm from the On-power Control System V2 #XP-10641. On-power Control System changes how your car behaves in the middle of the corner, adjust the angle with spacers to differ the toe-in change during...

Xpress

Mid Motor Aluminium Rear Stiffener Deck For Execute XQ10

Replacement part for the XQ10 Touring chassis or Mid Motor Conversion kit for Execute XQ1! Rear stiffener allowing for different stiffness to be dialed into your chassis! Feature: For: Xpress Execute XQ1 Mid Motor Conversion Kit XP-10495 For: Xpress...

Xpress

Long Travel Short Shock Set V2

Updated short shock set for the Xpress AT1 Am1 XQ10 and XQ10F, a structural redesign which eeks out more travel and ride height adjustment for the car! The increased travel inherently generates more traction for your chassis, so you will be able to...

Xpress

Long Travel Aluminium Short Shock Body 2pcs For Execute XQ2S XQ10 XQ10F

Replacement long travel shock bodies for the Execute XQ10F. It is also a direct upgrade for the XQ2S stock shock body. If use as replacement of the out of box short shock from the XQ10 and FM1S, the droop length with less downstop will be increase by...

Xpress

Hard Strong Front And Rear Composite Suspension Arms V2 For Execute Series Touring

New and improved suspension arms, in our hard material. These will be direct upgrade on the Execute series, during testing it was found that these suspension pieces gave more corner speed! Version 2 introduces an inner hole for mounting your rear shocks...

Xpress

Hard Coated Universal Rear Dogbone 43mm 2pcs For Execute Series Touring

Aluminium universal shaft for replacing the rear steel driveshaft for a lighter and more efficient drivetrain. Feature: For: Xpress Execute 1/10 Touring Series Material: Aluminium Colour: Titanium   Include: Driveshafts (2...

Xpress

Graphite 2.0mm One Piece Top Deck For Execute XQ10F XQ10 FWD Conversion

For some specific tracks that require less chassis flex, this one piece top deck on your FWD Converted XQ10 will allow more control and stability whilst cornering in both low and high speed corners! It fits with XQ10F as well. Feature: For: Xpress...

Xpress

Composite Upper Deck Stiffener 2pcs For Execute Series Touring

Plastic upper deck stiffener for tune the flex of the top deck stiffer but not too stiff when using the aluminium version! Feature: For: Xpress Execute XQ2S FT1 FT1S XQ10 XQ10F Material: Composite Colour: Black Include: Composite Stiffeners...

Xpress

Composite Rear Upright 2pcs (Hard) V2 For Execute Series Touring

V2 of our rear uprights. We have further added more material to the hub for higher durability. Hard composite version resulting in higher corner speed but may take away some drivability.   **Note: If you are upgrading the suspension of XQ1 or...

Xpress

Aluminium C-hub 4 Deg 2pcs For On-power Control System V2

Positive caster angle rear C-Hubs for our On-Power Control System V2 #XP-10641, adding on-power stability to the rear. Whilst also shortening the wheelbase which can be handy when running 0 arm sweep. Also included are the new kingpin sets which are...

Xpress

Aluminium C-hub 2 Deg 2pcs For On-power Control System V2

Positive caster angle rear C-Hubs for our On-Power Control System V2 #XP-10641, adding on-power stability to the rear. Whilst also shortening the wheelbase which can be handy when running 0 arm sweep. Also included are the new kingpin sets which are...

Xpress

Aluminium 7075 Servo Horn 17-21mm 25T

Adjust the height of which your linkage connects to your servo horn easily with the slide-able mounting tab on this servo horn! Raise the height for a more aggressive responding car, whilst lower it for a more linear feel! Feature: For: 25T Servo...

Xpress

Aluminum 7075 Height Adjustable Servo Horn 17-21mm 23T

Adjust the height of which your linkage connects to your servo horn easily with the slide-able mounting tab on this servo horn! Raise the height for a more aggressive responding car, whilst lower it for a more linear feel! Feature: For: 23T Servo...

Xpress

3mm Graphite Servo Mount Plate For XQ10F XQ10 FWD Conversion

Original replacement part for the Execute XQ10F and XQ10 FWD conversion Kit, keep spares ready so your race day won't cut short! Feature: For: Execute XQ10 FWD Conversion Kit #XP-10737 and XQ10F Material: Graphite Colour:...

Xpress

3.0mm Floating Servo Holder For Mid Motor Conversion Kit XP-10625

Replacement part for the Mid Motor Conversion kit for Execute XQ1 and XQ10 Feature: For: Xpress Mid Motor Conversion Kit XP-10625 and XQ10 Material: Graphite Colour: Black Include: 3.0mm Floating Servo Holder (1 pc)

Xpress

2mm Graphite Rear Top Deck For Execute XQ10F XQ10 FWD Conversion

Type a description for this product here...