Car Spare Parts

X-Square

X-Square Aluminium 2.5mm Front Bumper Plate For Xray X4 T4 2020 2021

Bling upper bumper support plate for X4 T4 series, bling sleek black aluminium! Feature: For: Xray X4 T4 Series Material: Aluminum Colour: Black Include Aluminium Bumper Plate (1 pc)

MSRP:

Was:

Now: £17.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
X-Square

X-Square Tweak Stick Set For 1/10 Touring Car

Stick for applying pressure to ensure a flat chassis when installing the topdeck onto your chassis for cars with tradition vertical shock towers. Install X-Square pressure plates for cars without shock towers. Feature: For: 1/10 Touring Car...

MSRP:

Was:

Now: £24.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

5.5mm Ball 10mm Thread 4pcs (longer gap between flange)

This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle. Feature: For: Xpress Shock Mounting Material: Steel Colour: Black Include: 5.5mm Ball Ends (4 pcs)

MSRP:

Was:

Now: £7.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

5.5mm Ball 8mm Thread 4pcs (longer gap between flange)

This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle. Feature: For: Xpress Shock Mounting Material: Steel Colour: Black Include: 5.5mm Ball Ends (4 pcs)

MSRP:

Was:

Now: £7.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Graphite 3.0MM Rear Short Shock Tower For EXECUTE XQ1 XQ1S XQ2S

Run short shocks (#XP-10593) on your Execute XQ1 XQ1S or XQ2S! With short shocks you get more stability through corners which results in more consistent laptimes! **Note: For XQ1 and XQ1S, need to use with Execute XQ10 Short Shock Set V2 Long Travel...

MSRP:

Was:

Now: £19.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Hard Strong Composite V2 C Hub 4 Degree For Execute Series Touring

Updated C Hubs found on the Execute XQ2S #XP-90032 and can also be used in other Execute Touring cars when used in conjunction with 3.0mm outer suspension pin arms and the #XP-10401 C-hub king pin set! Feature: For: Xpress Execute XQ2S DR1S For...

MSRP:

Was:

Now: £8.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

King Pin Set 2+2 For Execute V2 Strong C-hub

Replacement King pin for the new V2 Strong C-Hub found on the Execute XQ2S DR1S, be sure to keep a set in your parts bag or when you're upgrading from the old C Hubs! Note: To use this new collar with other touring chassis in the Execute series,...

MSRP:

Was:

Now: £6.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Motor Mount Post With Flange For Execute FM1S

Original replacement part for Execute FM1S and XQ10F, keep spares ready so your race day won't cut short! Feature: For: Xpress Execute FM1S XQ10F Material: Aluminium Colour: Red Include: Aluminium Motor Mount Flanged Post (1 pc)

MSRP:

Was:

Now: £8.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Chassis Stiffener Post For Execute FT1 FT1S

Execute FT1/FT1S genuine official replacement part from Xpress. Feature: For: Execute FT1 / FT1S Material: Aluminium Colour: Red Include: Chassis Stiffener Post (1 pc)

MSRP:

Was:

Now: £6.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
X-Square

X-Square Rear Low Profile Shock Mount Upper Bulkhead For Xray T4 20 21

Integrated shock mount upper bulkhead to lower the centre of gravity of your Xray T4 20 and 21! This results in a more flat cornering response increasing consistency! Also with super minute shock angle adjustment through adding/removing shims! You can...

MSRP:

Was:

Now: £54.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
X-Square

X-Square Front Low Profile Shock Mount Upper Bulkhead For Xray T4 20 21

Integrated shock mount upper bulkhead to lower the centre of gravity of your Xray T4 20 and 21! This results in a more flat cornering response increasing consistency! Also with super minute shock angle adjustment through adding/removing shims! You can...

MSRP:

Was:

Now: £49.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Low Profile Bumper Body Post Set V2

Newly designed bumper pieces and body posts to be used with the low profile bumper foam XP-10562. Included are two bodypost mounts to rotate the rear mounting by 90 degrees, to mount the body posts parallel to the chassis. Note: The bumper parts in this...

MSRP:

Was:

Now: £9.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Composite Steering Set For Execute Series

Original replacement part for the Execute XQ1S, XM1S, and FM1S, keep spares ready so your race day won't cut short! **Note: The side servo mount does not fit on FM1S, please use FM1S Composite Side Servo Mount #XP-10741 Feature For: Xpress Execute...

MSRP:

Was:

Now: £9.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Yeah Racing

Yeah Racing Drive Belt Rear 63T 189 3MM For Xray T4 Yokomo BD7 Tamiya TRF419

Upgrade rear belt for either Xray's T4 or Yokomo's BD7, made from strong and flexible material giving a more long lasting and efficicent drivetrain. Feature: For: Xray T4, Yokomo BD7 Material: Kevlar Colour: Black Include: Drive Belt Rear...

MSRP:

Was:

Now: £6.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress Alloy 2mm Bottom Chassis Plate 210mm FM1S

Aluminium bottom chassis for Execute FM1S, used for in either High Grip Asphalt or Carpet. By adding more weight to the lowest point of the chassis, this increases stability and lowers the centre of gravity! Feature: For: Xpress Execute...

MSRP:

Was:

Now: £67.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
3Racing

4.8 x 4mm Ball Stud Teflon Coated For 3RACING SAKURA M4Pro & Sport (4)

4.8 x 4mm Ball Stud Teflon Coated For 3RACING SAKURA M4Pro & Sport (4)

MSRP:

Was:

Now: £9.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
3Racing

3Racing M3 x 8 Flat Head Hex Screw (10pcs)

3Racing M3 x 8 Flat Head Hex Socket (10pcs)

MSRP:

Was: £3.95

Now: £2.77

MSRP:

Was:

Now: (Ex. VAT)

Out of stock Compare
Xpress

FRP 4mm Servo Mount Spacer For Execute FM1S

Original replacement part for Execute FM1S, keep spares ready so your race day won't cut short! Feature: For: Xpress Execute FM1S Material: FRP Colour: Black Include: FRP Servo Mount Spacer (1 pc)

MSRP:

Was:

Now: £4.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

FRP 2.0mm Top Deck V2 For Execute XQ2S XQ1S

Replacement top deck for the Execute XQ2S, which can also be used on the XQ1S to introduce the flex elimination system to the car! Feature: For: Xpress Execute XQ1S XQ2S Material: FRP Coluor: Black Include: Top Deck (1 pc)

MSRP:

Was:

Now: £10.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Flanged Bearing 3x6x2.5mm 2pcs For Execute Flex Elimination Upper Deck

3x6x2.5mm flanged bearing, for use in Execute Flex Elimination Upper Deck adjustment area.The Flex Eliminator Upper Deck comes out of box from the XQ2S, FM1S and XQ10F kits.If use with XQ10, please use with 2.0mm Graphite Upper Deck For Flex Elimination...

MSRP:

Was:

Now: £5.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare