Xpress Parts

Xpress

Execute FM1S 225mm Wheelbase 2mm Graphite Rear Top Deck

Convert your Execute FM1S to 225mm wheelbase, which results in a more stable car but sacrificing some steering. Graphite decks also provide more consistent handling when compared to the glass fiber. Note: To be used with the 225mm wheelbase chassis plate...

Xpress

Execute FM1S 225mm Wheelbase 2mm Graphite One Piece Top Deck

Convert your Execute FM1S to 225mm wheelbase, which results in a more stable car but sacrificing some steering. Graphite decks also provide more consistent handling when compared to the glass fibre. Note: To be used with the 225mm wheelbase chassis plate...

Xpress

Execute FM1S 225mm 2.25mm Graphite Main Chassis Plate

Convert your Execute FM1S to 225mm wheelbase, which results in a more stable car but sacrificing some steering. Graphite decks also provide more consistent handling when compared to the glass fibre. Feature: For: Execute FM1S Material:...

Xpress

Composite Wheel Hub Hex Set 4pcs For Execute

Execute XQ1S XQ2S XM1S FT1S FM1S genuine official replacement part from Xpress. Feature: For: Xpress Execute XQ1S XQ2S XM1S FT1S FM1S Material: Plastic Colour: Black Include: Wheel Hex (4 pcs) Wheel Hex Pins (4 pcs)

Xpress

Aluminium Upper Shock Cap For Execute XQ1S XM1S FT1S FM1S

Execute XQ1S XM1S FT1S FM1S genuine official replacement part from Xpress. Feature: For: Xpress Execute XQ1S XM1S FT1S FM1S Material: Aluminium Colour: Red Include: Aluminium Upper Shock Cap (2 pcs)

Xpress

Composite Rear Upright 2pcs V2 For Execute Series Touring

V2 of our rear uprights. We have further added more material to the hub for higher durability. **Note: If you are upgrading the suspension of XQ1 or XQ1S, you also need to purchase the 3.0mm outer suspension pins #XP-10602 and Hard Strong Front And Rear...

Xpress

5.5mm Ball 10mm Thread 4pcs (longer gap between flange)

This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle. Feature: For: Xpress Shock Mounting Material: Steel Colour: Black Include: 5.5mm Ball Ends (4 pcs)

Xpress

5.5mm Ball 8mm Thread 4pcs (longer gap between flange)

This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle. Feature: For: Xpress Shock Mounting Material: Steel Colour: Black Include: 5.5mm Ball Ends (4 pcs)

Xpress

Graphite 3.0MM Rear Short Shock Tower For EXECUTE XQ1 XQ1S XQ2S

Run short shocks (#XP-10593) on your Execute XQ1 XQ1S or XQ2S! With short shocks you get more stability through corners which results in more consistent laptimes! **Note: For XQ1 and XQ1S, need to use with Execute XQ10 Short Shock Set V2 Long Travel...

Xpress

Hard Strong Composite V2 C Hub 4 Degree For Execute Series Touring

Updated C Hubs found on the Execute XQ2S #XP-90032 and can also be used in other Execute Touring cars when used in conjunction with 3.0mm outer suspension pin arms and the #XP-10401 C-hub king pin set! Feature: For: Xpress Execute XQ2S DR1S For...

Xpress

King Pin Set 2+2 For Execute V2 Strong C-hub

Replacement King pin for the new V2 Strong C-Hub found on the Execute XQ2S DR1S, be sure to keep a set in your parts bag or when you're upgrading from the old C Hubs! Note: To use this new collar with other touring chassis in the Execute series,...

Xpress

Motor Mount Post With Flange For Execute FM1S

Original replacement part for Execute FM1S and XQ10F, keep spares ready so your race day won't cut short! Feature: For: Xpress Execute FM1S XQ10F Material: Aluminium Colour: Red Include: Aluminium Motor Mount Flanged Post (1 pc)

Xpress

Chassis Stiffener Post For Execute FT1 FT1S

Execute FT1/FT1S genuine official replacement part from Xpress. Feature: For: Execute FT1 / FT1S Material: Aluminium Colour: Red Include: Chassis Stiffener Post (1 pc)

Xpress

Low Profile Bumper Body Post Set V2

Newly designed bumper pieces and body posts to be used with the low profile bumper foam XP-10562. Included are two bodypost mounts to rotate the rear mounting by 90 degrees, to mount the body posts parallel to the chassis.   Note: The bumper parts...

Xpress

Composite Steering Set For Execute Series

Original replacement part for the Execute XQ1S, XM1S, and FM1S, keep spares ready so your race day won't cut short! **Note: The side servo mount does not fit on FM1S, please use FM1S Composite Side Servo Mount #XP-10741 Feature For: Xpress Execute...

Xpress

Xpress Alloy 2mm Bottom Chassis Plate 210mm FM1S

Aluminium bottom chassis for Execute FM1S, used for in either High Grip Asphalt or Carpet. By adding more weight to the lowest point of the chassis, this increases stability and lowers the centre of gravity! Feature: For: Xpress Execute...

Xpress

FRP 4mm Servo Mount Spacer For Execute FM1S

Original replacement part for Execute FM1S, keep spares ready so your race day won't cut short! Feature: For: Xpress Execute FM1S Material: FRP Colour: Black Include: FRP Servo Mount Spacer (1 pc)

Xpress

FRP 2.0mm Top Deck V2 For Execute XQ2S XQ1S

Replacement top deck for the Execute XQ2S, which can also be used on the XQ1S to introduce the flex elimination system to the car! Feature: For: Xpress Execute XQ1S XQ2S Material: FRP Coluor: Black Include: Top Deck (1 pc)

Xpress

Flanged Bearing 3x6x2.5mm 2pcs For Execute Flex Elimination Upper Deck

3x6x2.5mm flanged bearing, for use in Execute Flex Elimination Upper Deck adjustment area.The Flex Eliminator Upper Deck comes out of box from the XQ2S, FM1S and XQ10F kits.If use with XQ10, please use with 2.0mm Graphite Upper Deck For Flex Elimination...

Xpress

Aluminium Anti-Roll Bar Bushing For Execute XQ1 XQ10 FT1 XQ10F XM1

Aluminium Anti-Roll Bar Bushing, genuine official replacement part from Xpress. Included are two pieces that can be inserted into the bulkhead or attaches to the end of the roll bar. Feature: For: Execute XQ1 FT1 XM1 XQ10 XQ10F Material:...