FT1 & FT1S Parts

Xpress

Xpress Hard Strong Composite V2 C Hub 4 Degree For Execute Series Touring

Updated C Hubs found on the Execute XQ2S #XP-90032 and can also be used in other Execute Touring cars when used in conjunction with 3.0mm outer suspension pin arms and the #XP-10401 C-hub king pin...

MSRP:

Was:

Now: £8.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress King Pin Set 2+2 For Execute V2 Strong C-hub

Replacement King pin for the new V2 Strong C-Hub found on the Execute XQ2S DR1S, be sure to keep a set in your parts bag or when you're upgrading from the old C Hubs! Note: To use this new collar...

MSRP:

Was:

Now: £6.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Chassis Stiffener Post For Execute FT1 FT1S

Execute FT1/FT1S genuine official replacement part from Xpress. Feature: For: Execute FT1 / FT1S Material: Aluminium Colour: Red Include: Chassis Stiffener Post (1 pc)

MSRP:

Was:

Now: £6.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress Low Profile Bumper Body Post Set V2

Newly designed bumper pieces and body posts to be used with the low profile bumper foam XP-10562. Included are two bodypost mounts to rotate the rear mounting by 90 degrees, to mount the body posts...

MSRP:

Was:

Now: £9.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Composite Steering Set For Execute Series

Original replacement part for the Execute XQ1S, XM1S, and FM1S, keep spares ready so your race day won't cut short! **Note: The side servo mount does not fit on FM1S, please use FM1S Composite Side...

MSRP:

Was:

Now: £9.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress Flanged Bearing 3x6x2.5mm 2pcs For Execute Flex Elimination Upper Deck

3x6x2.5mm flanged bearing, for use in Execute Flex Elimination Upper Deck adjustment area.The Flex Eliminator Upper Deck comes out of box from the XQ2S, FM1S and XQ10F kits.If use with XQ10, please...

MSRP:

Was:

Now: £5.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress Aluminium Anti-Roll Bar Bushing For Execute XQ1 XQ10 FT1 XQ10F XM1

Aluminium Anti-Roll Bar Bushing, genuine official replacement part from Xpress. Included are two pieces that can be inserted into the bulkhead or attaches to the end of the roll bar...

MSRP:

Was:

Now: £10.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress Graphite 2.0mm Flex Elimination Top Deck For Execute FT1 FT1S

Designed to be used with the Flex Eliminator Bearing and Collar set #XP-10683, this set will allow you to limit longitudinal chassis flex whilst retaining lateral chassis flex. What this allows is...

MSRP:

Was:

Now: £29.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Aluminium Adjustable Ackermann Steering Plate For Execute Sport Series

Adjust the distance between the two ballends on the steering bridge with this insert steering bridge system! What this achieves is different ackermann settings and adjusts how much steering angle...

MSRP:

Was:

Now: £22.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress Foam Bumper For Execute FT1 FT1S

Execute FT1/FT1S genuine official replacement part from Xpress. Feature: For: Execute FT1 FT1S Material: Foam Colour: Black Include: Foam Bumper Pieces (2 pcs)

MSRP:

Was:

Now: £4.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress Front Bumper Set For Execute FT1 FT1S

Execute FT1 / FT1S genuine official replacement part from Xpress. Feature: For: Execute FT1 FT1S Material: Plastic Colour: Black Include: Upper Bumper Plate (1 pc) Lower Bumper Plate (1...

MSRP:

Was:

Now: £7.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress Composite Upper Bulkhead Clamp V2

Replacement upper bulkhead set for the Execute XQ2S. Can also be installed into other sport series cars, which allows the adjustment of high or low differential position! Feature: For: Xpress...

MSRP:

Was:

Now: £11.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress 5x7x0.2mm Drive Axle Spacers 10pcs

Reduce the amount of free play you might get from bearing slop in your driveshafts with these shims. Applicable to the front or rear. Feature: For: Driveshaft Axle Spacing Material:...

MSRP:

Was:

Now: £5.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress Composite Upper Deck Collar For Flex Elimination For XQ2S XQ10 FM1S

Plastic Upper Deck Collar which allows you to control the flex on either end of your car. This part is ready for use in XQ2S, XQ10F and FM1S out of box. If you are upgrading the XQ10, XQ1/ XQ1S, FT1...

MSRP:

Was:

Now: £6.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Body Support Brace For Execute XQ2S Strong V2 C Hub

Body support braces to be used in conjunction with the new V2 Strong C Hubs, found on the Execute XQ2S or even for upgrading your Execute series car!Feature: Feature: For: Xpress Execute XQ2S,...

MSRP:

Was:

Now: £7.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Sports Composite Short Shock Set 2pcs

Short shock sets as same as the original ones that came with the Execute XQ2S, will also fit other Xpress series cars with short shock towers installed! For XQ1, XQ1S and XQ2S, please use: FRP 3...

MSRP:

Was:

Now: £21.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress Aluminium +0.75mm 2 Piece Suspension Mount 2pcs For Execute Series

Get wider or narrower trackwidth for your Execute Series car! Either gain 0.75mm in either direction by installing the mount facing the offset towards inside the chassis or outside! Note: When...

MSRP:

Was:

Now: £19.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress Aluminium +0.75mm RR Lower one Piece Suspension Mount For Execute Series

Get wider or narrower trackwidth for your Execute Series car! Either gain 0.75mm in either direction by installing the mount facing the offset towards inside the chassis or outside! Note: When...

MSRP:

Was:

Now: £19.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress V2 Strong Composite C Hubs 2pcs For FT1 FT1S XQ1 XQ1S XQ2S, XQ10, XQ10F

Updated C Hubs found on the Execute XQ2S, DR1S #XP-90032 and can also be used in other Execute Touring cars when used in conjunction with 3.0mm outer suspension pin arms and the XP-10401 C Hub King...

MSRP:

Was:

Now: £8.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress Lower Suspension Mount Spacer 0.5mm For Execute

Further fine tune your roll centers with these easy to install spacer shims for your lower suspension mounts! Also included a shim for the one-piece optional FR mount! Feature: For: Xpress Execute...

MSRP:

Was:

Now: £14.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare