Dragnalo DR1S Parts

Xpress

Long Travel Short Shock Grey Composite Shock Parts

Replacement plastic shock parts for the V2 long travel short shock set #XP-10593, this is a direct upgrade for the stock shocks from the XQ2S. It can still fit with original kit short shock from XQ10 and FM1S, but the shock length will be decrease...

MSRP:

Was:

Now: £9.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Composite Rear Upright 2pcs V2 For Execute Series Touring

V2 of our rear uprights. We have further added more material to the hub for higher durability. **Note: If you are upgrading the suspension of XQ1 or XQ1S, you also need to purchase the 3.0mm outer suspension pins #XP-10602 and Hard Strong Front And Rear...

MSRP:

Was:

Now: £8.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

5.5mm Ball 10mm Thread 4pcs (longer gap between flange)

This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle. Feature: For: Xpress Shock Mounting Material: Steel Colour: Black Include: 5.5mm Ball Ends (4 pcs)

MSRP:

Was:

Now: £7.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

5.5mm Ball 8mm Thread 4pcs (longer gap between flange)

This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle. Feature: For: Xpress Shock Mounting Material: Steel Colour: Black Include: 5.5mm Ball Ends (4 pcs)

MSRP:

Was:

Now: £7.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress Graphite 3.0MM Rear Short Shock Tower For EXECUTE XQ1 XQ1S XQ2S

Run short shocks (#XP-10593) on your Execute XQ1 XQ1S or XQ2S! With short shocks you get more stability through corners which results in more consistent laptimes! **Note: For XQ1 and XQ1S, need to use with Execute XQ10 Short Shock Set V2 Long Travel...

MSRP:

Was:

Now: £19.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Hard Strong Composite V2 C Hub 4 Degree For Execute Series Touring

Updated C Hubs found on the Execute XQ2S #XP-90032 and can also be used in other Execute Touring cars when used in conjunction with 3.0mm outer suspension pin arms and the #XP-10401 C-hub king pin set! Feature: For: Xpress Execute XQ2S DR1S For Xpress...

MSRP:

Was:

Now: £8.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

King Pin Set 2+2 For Execute V2 Strong C-hub

Replacement King pin for the new V2 Strong C-Hub found on the Execute XQ2S DR1S, be sure to keep a set in your parts bag or when you're upgrading from the old C Hubs! Note: To use this new collar with other touring chassis in the Execute series,...

MSRP:

Was:

Now: £6.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Low Profile Bumper Body Post Set V2

Newly designed bumper pieces and body posts to be used with the low profile bumper foam XP-10562. Included are two bodypost mounts to rotate the rear mounting by 90 degrees, to mount the body posts parallel to the chassis. Note: The bumper parts in this...

MSRP:

Was:

Now: £9.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Composite Steering Set For Execute Series

Original replacement part for the Execute XQ1S, XM1S, and FM1S, keep spares ready so your race day won't cut short! **Note: The side servo mount does not fit on FM1S, please use FM1S Composite Side Servo Mount #XP-10741 Feature For: Xpress Execute...

MSRP:

Was:

Now: £9.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Aluminium Adjustable Ackermann Steering Plate For Execute Sport Series

Adjust the distance between the two ballends on the steering bridge with this insert steering bridge system! What this achieves is different ackermann settings and adjusts how much steering angle difference you can achieve between the outside and inside...

MSRP:

Was:

Now: £22.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Composite Upper Bulkhead Clamp V2

Replacement upper bulkhead set for the Execute XQ2S. Can also be installed into other sport series cars, which allows the adjustment of high or low differential position! Feature: For: Xpress Execute XQ2S XQ1S FT1S FM1S Material: Composite Colour:...

MSRP:

Was:

Now: £11.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

FRP 3.0mm Front Short Shock Tower For Execute XQ2S XQ1S

Replacement FRP shock tower the Execute XQ2S! Also fits on the Execute XQ1S if you want to upgrade your ride to run short shocks #XP-10797. Feature: For: Xpress Execute XQ2S XQ1S Material: FRP Colour: Black Include: Shock Tower (1...

MSRP:

Was:

Now: £9.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

5x7x0.2mm Drive Axle Spacers 10pcs

Reduce the amount of free play you might get from bearing slop in your driveshafts with these shims. Applicable to the front or rear. Feature: For: Driveshaft Axle Spacing Material: Steel Colour: Silver Include: 0...

MSRP:

Was:

Now: £5.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Body Support Brace For Execute XQ2S Strong V2 C Hub

Body support braces to be used in conjunction with the new V2 Strong C Hubs, found on the Execute XQ2S or even for upgrading your Execute series car!Feature: Feature: For: Xpress Execute XQ2S, Strong V2 C Hub Material: Composite Color:...

MSRP:

Was:

Now: £7.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Sports Composite Short Shock Set 2pcs

Short shock sets as same as the original ones that came with the Execute XQ2S, will also fit other Xpress series cars with short shock towers installed! For XQ1, XQ1S and XQ2S, please use: FRP 3.0mm Front Short Shock Tower #XP-10791 and FRP 3.0mm...

MSRP:

Was:

Now: £21.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress V2 Strong Composite C Hubs 2pcs For FT1 FT1S XQ1 XQ1S XQ2S, XQ10, XQ10F

Updated C Hubs found on the Execute XQ2S, DR1S #XP-90032 and can also be used in other Execute Touring cars when used in conjunction with 3.0mm outer suspension pin arms and the XP-10401 C Hub King Pin Set! Feature: For: Xpress Execute XQ2S...

MSRP:

Was:

Now: £8.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress Composite Anti Tweak Battery Holder

Spring loaded anti tweak battery holders for the Execute series of cars! Highly adjustable for different types of batteries, including different height posts to use with either normal or LCG batteries! Without using tape, the chassis is not under...

MSRP:

Was:

Now: £15.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress Graphite 3.0mm Front Shock Tower For Short Shocks XQ1 XQ1S XQ2S

Run short shocks (#XP-10593) on your Execute XQ1 or XQ1S! With short shocks you get more stability through corners which results in more consistent laptimes! Feature: For: Execute XQ1 XQ1S DR1S Material: Graphite Colour: Black Include: Shock Tower (1...

MSRP:

Was:

Now: £18.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress FM1S Aluminium Motor Mount

This is the motor of Xpress Execute FM1S and XQ10F, genuie replacement part from Xpress. Feature: For: Xpress Execute FM1S XQ10F Material: Aluminium Colour: Red Include: Aluminium Motor Mount (1 pc)

MSRP:

Was:

Now: £27.50

MSRP:

Was:

Now: (Ex. VAT)

Out of stock Compare
Xpress

Xpress Composite Spool Titanium Outdrive Adaptor 3.5mm 2pcs For Execute Series Touring

Titanium lightweight yet tough and durable spool outdrives for all forms of racing! Specially re-designed shape to make use of the full outdrive blade to get instantaneous power delivery! The lower weight increases the drive train efficiency. This out...

MSRP:

Was:

Now: £29.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare