XM1 & XM1S Parts

Xpress

Long Travel Short Shock Grey Composite Shock Parts

Replacement plastic shock parts for the V2 long travel short shock set #XP-10593, this is a direct upgrade for the stock shocks from the XQ2S.  It can still fit with original kit short shock from XQ10 and FM1S, but the shock length will be decrease...

Xpress

Composite Wheel Hub Hex Set 4pcs For Execute

Execute XQ1S XQ2S XM1S FT1S FM1S genuine official replacement part from Xpress. Feature: For: Xpress Execute XQ1S XQ2S XM1S FT1S FM1S Material: Plastic Colour: Black Include: Wheel Hex (4 pcs) Wheel Hex Pins (4 pcs)

Xpress

Aluminium Upper Shock Cap For Execute XQ1S XM1S FT1S FM1S

Execute XQ1S XM1S FT1S FM1S genuine official replacement part from Xpress. Feature: For: Xpress Execute XQ1S XM1S FT1S FM1S Material: Aluminium Colour: Red Include: Aluminium Upper Shock Cap (2 pcs)

Xpress

5.5mm Ball 10mm Thread 4pcs (longer gap between flange)

This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle. Feature: For: Xpress Shock Mounting Material: Steel Colour: Black Include: 5.5mm Ball Ends (4 pcs)

Xpress

5.5mm Ball 8mm Thread 4pcs (longer gap between flange)

This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle. Feature: For: Xpress Shock Mounting Material: Steel Colour: Black Include: 5.5mm Ball Ends (4 pcs)

Xpress

Low Profile Bumper Body Post Set V2

Newly designed bumper pieces and body posts to be used with the low profile bumper foam XP-10562. Included are two bodypost mounts to rotate the rear mounting by 90 degrees, to mount the body posts parallel to the chassis.   Note: The bumper parts...

Xpress

Composite Steering Set For Execute Series

Original replacement part for the Execute XQ1S, XM1S, and FM1S, keep spares ready so your race day won't cut short! **Note: The side servo mount does not fit on FM1S, please use FM1S Composite Side Servo Mount #XP-10741 Feature For: Xpress Execute...

Xpress

Flanged Bearing 3x6x2.5mm 2pcs For Execute Flex Elimination Upper Deck

3x6x2.5mm flanged bearing, for use in Execute Flex Elimination Upper Deck adjustment area.The Flex Eliminator Upper Deck comes out of box from the XQ2S, FM1S and XQ10F kits.If use with XQ10, please use with 2.0mm Graphite Upper Deck For Flex Elimination...

Xpress

Aluminium Anti-Roll Bar Bushing For Execute XQ1 XQ10 FT1 XQ10F XM1

Aluminium Anti-Roll Bar Bushing, genuine official replacement part from Xpress. Included are two pieces that can be inserted into the bulkhead or attaches to the end of the roll bar. Feature: For: Execute XQ1 FT1 XM1 XQ10 XQ10F Material:...

Xpress

Aluminium Adjustable Ackermann Steering Plate For Execute Sport Series

Type a description for this product here...

Xpress

Xpress Execute V2 XQ2S XQ1S XM1S Front and Rear Composite One Piece Upper Clamp

Replacement upper bulkhead set for the Execute XQ2S. Can also be installed into other sport series cars, which allows the adjustment of high or low differential position!   Feature: For: Xpress Execute XQ2S XQ1S FT1S FM1S Material:...

Xpress

Light Foam Bumper For Execute FM1S

Original replacement part for Execute FM1S , keep spares ready so your race day isn't cut short!   Feature: For: Xpress Execute FM1S Material: Foam Colour: Black   Include: Foam Bumper (1 pc)

Xpress

Sports Composite Short Shock Set 2pcs

Short shock sets as same as the original ones that came with the Execute XQ2S, will also fit other Xpress series cars with short shock towers installed! For XQ1, XQ1S and XQ2S, please use: FRP 3.0mm Front Short Shock Tower #XP-10791 and FRP 3.0mm...

Xpress

Aluminium 2 Piece Piece Suspension Mount (+0.75) For XQ1, XM1, FT1, XQ10

Increase the track width for your Execute Series car! Gain 1.5mm in total (0.75mm each side) in track width in the rear!    Feature: For: Xpress Execute XQ1 XQ1S XQ2S XM1 FT1 FT1S XQ10 FM1S Material: Aluminum Colour:...

Xpress

Aluminium RR Lower One Piece Suspension Mount (+0.75) For XQ1, XM1, FT1, XQ10

Increase the track width for your Execute Series car! Gain 1.5mm in total (0.75mm each side) in track width in the rear!  Feature: For: Xpress Execute XQ1 XQ1S XQ2S XM1 FT1 FT1S XQ10 FM1S Material: Aluminum Colour: Black Include: 0...

Xpress

Lower Suspension Mount Spacer 0.5mm For XQ2S XQ1S XQ1 XM1S XM1 FT1 FT1S XQ10

Further fine tune your roll centres with these easy to install spacer shims for your lower suspension mounts! Also included is a shim for the one-piece optional FR mount!   Feature: For: Xpress Execute XQ1S XQ1 XM1S XM1 FT1 FT1S XQ10 Material:...

Xpress

Graphite 3.0MM Rear Short Shock Tower For EXECUTE XM1 XM1S FM1S

Graphite upgrade for our Execute M-Chassis Mini cars, for our XM1, you will be able to run our V2 Short Shock set (#XP-10593) to get a even better handling car!   Feature:   For: Xpress Execute XM1 XM1S FM1S Material: Graphite Colour:...

Xpress

Graphite 3.0MM Front Short Shock Tower For EXECUTE XM1 XM1S FM1S

Graphite upgrade for our Execute M-Chassis Mini cars, for our XM1, you will be able to run our V2 Short Shock set (#XP-10593) to get a even better handling car!   Feature:   For: Xpress Execute XM1 XM1S FM1S Material: Graphite Colour:...

Xpress

Composite Anti Tweak Battery Holder

Spring loaded anti tweak battery holders for the Execute series of cars! Highly adjustable for different types of batteries, including different height posts to use with either normal or LCG batteries! Without having to use tape, the chassis is not under...

Xpress

Execute FM1S Aluminium Motor Mount

Original replacement part for Execute FM1S , keep spares ready so your race day isn't cut short! Feature: For: Xpress Execute FM1S Material: Aluminum Color: Red   Include: Aluminum Spur Gear Adaptor (1 pc)