XM1S Sport Mini TC (4wd M Chassis) MTC

Xpress

Xpress Aluminium 1mm Lowered Rear Shock Tower For XM1 XM1S FM1S

Aluminium lowered shock tower for Xpress Execute XM1 and XM1S! Features 1mm lowered mounting holes for improved stability throughout the corners! Less lateral flex when compared to carbon fibre, providing even more stability throughout the...

MSRP:

Was:

Now: £14.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress Aluminium 1mm Lowered Front Shock Tower For XM1 XM1S

Aluminium lowered shock tower for Xpress Execute FM1S, XM1 and XM1S! Features 1mm lowered mounting holes for improved stability throughout the corners! Less lateral flex when compared to carbon fibre, providing even more stability throughout the...

MSRP:

Was:

Now: £12.95

MSRP:

Was:

Now: (Ex. VAT)

Out of stock Compare
Xpress

Aluminium Motor Fan Mount For XQ1 XQ1S XM1 XM1S

Alloy fan mount which screws onto the rear lead weight hole, for a secure way to mount a motor fan! Flat slot which uses one screw which stops the fan from rotating on the mount. *Photos for reference only. Feature: For: Xpress XQ1 XQ1S XM1...

MSRP:

Was:

Now: £10.50

MSRP:

Was:

Now: (Ex. VAT)

Out of stock Compare
Xpress

Xpress Double Joint Universal Shaft 2pcs For Execute XM1 XM1S

Replacement Double Joint Universal Shafts for Execute XM1, or a direct fit upgrade for the XM1S (5x10x4mm bearings unchanged). Double jointed universals reduce the angle which the shafts are at so reduces the vibrations generated and thus give a better...

MSRP:

Was:

Now: £27.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress Alloy 2mm Bottom Chassis Plate For XM1 XM1S

Aluminium bottom chassis for Execute XQ1, used for in either High Grip Asphalt or Carpet. By adding more weight to the lowest point of the chassis, this increases stability and lowers the center of gravity! Feature: For: Xpress Execute XM1...

MSRP:

Was:

Now: £77.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Susumu

Susumu Workshop Velcro Battery Holder For XQ1 XQ1S

Susumu Workshop Velcro Battery Holder For XQ1 XQ1S Can be fitted to XM1 XM1S but will require short Velcro Strap - XP10362

MSRP:

Was:

Now: £11.50

MSRP:

Was:

Now: (Ex. VAT)

Out of stock Compare
Factory Pro

Factory Pro RC 144T 432 Low Friction Drive Belt For Xpress XM1 XM1S

Factory Pro RC 144T 432 Low Friction Drive Belt For Xpress MTC The lower friction results into increased performance. Fits Xpress XM1, XM1S

MSRP:

Was:

Now: £14.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Factory Pro

Factory Pro RC 57T 171 Low Friction Drive Belt For Xpress XM1 XM1S

Factory Pro RC 57T 171 Low Friction Drive Belt For Xpress MTC The lower friction results into increased performance. Fits Xpress XM1, XM1S

MSRP:

Was:

Now: £12.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Factory Pro

Factory Pro 3mm Red Shim/Washer (10 pcs)

Factory Pro 3mm Red Shim/Washer (10 pcs) Material - Alloy Colour - Red 10 per pack

MSRP:

Was:

Now: £6.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress Damper Part Replacement Set

This is Xpress Xpresso K1 Damper Part Replacement Set. Feature: For: Xpress Xpresso K1, XM1, XM1S, XQ1, XQ1s Material: Plastic Colour: Black Include: Pistons (4 pcs) Lower Cartridge Cover (4 pcs) O-Ring Spacer (4 pcs)

MSRP:

Was:

Now: £7.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress Aluminium Layshaft Bulkhead 2pcs For Execute XQ1S XM1 XM1S

Aluminium layshaft bulkheads for people who wish to run high powered motors. These aluminium pieces will keep the layshaft straight under hard acceleration and braking. Feature: For: Execute XQ1S XM1 XM1S Material: Aluminum Color:...

MSRP:

Was:

Now: £16.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress 3x18mm Flat Spot Suspension Pivot Pin

Flat pin suspension pivot pin, for use in both the front C hub and rear hub. The flat spot allows for more surface area for the set screw to secure the pin in place and prevent it from flying out. Feature: For: Xpress Material: Steel Colour:...

MSRP:

Was:

Now: £6.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress Bando Kevlar Drive Belt Rear 3 x 171 mm

Bando branded belts for the Execute XM1 series, made for longer lifespan but sacrificing some smoothness at the same time for use when using high powered motors! Feature: For: Xpress Execute XM1 XM1S Material: Kevlar Colour:...

MSRP:

Was:

Now: £7.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Camber Stiffener Link Ball End

This is Xpress Camber Stiffener Link Ball End for Execute Series, genuine official replacement part from Xpress. Feature: For: Xpress Execute XQ1 XQ10 XQ10F XM1 FT1 XQ1S XQ2S XM1S FT1S FM1S DR1S Material: Plastic Colour: Black Include: Camber...

MSRP:

Was:

Now: £9.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress 3x18mm C Hub Upright Pivot Pins 4pcs For Execute AM1 AM1S XM1S FM1S

Execute XM1 XM1S FM1S genuine official replacement part from Xpress. Feature: For: Xpress AM1 AM1S FM1S XM1 XM1S Material: Steel Colour: Silver Include: C Hub Upright Pivot Pins (4 pcs)

MSRP:

Was:

Now: £4.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress Brass RF One Piece Suspension Mount for Execute Series

Adjust your chassis stiffness by changing to this optional one piece suspension mount for the front of the rear end of your car! This suspension mount keeps the same width as the separate suspension pieces so the arm sweep angle isn't affected! Using...

MSRP:

Was:

Now: £18.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress Brass FR One Piece Suspension Mount For Execute Series

Execute XQ1 Brass FR One Piece Suspension Mount For XQ1 XQ1S XM1S Feature: For: Execute XQ1 Material: Brass Colour: Black Include: One Piece Suspension Mount (1 pc)

MSRP:

Was:

Now: £18.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress Anti-Roll Bar Bushing Set

Bushing set for installing optional roll bars onto your Execute XQ1S! Comes with all mounting hardware for installing this part. Feature For: Xpress Execute XQ1S Material: Aluminium Color: Red/Black Include Rollbar Collar (1...

MSRP:

Was:

Now: £8.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress Aluminium 5mm Ackermann Steering Plate Dual Servo Saver

Gain more mid corner control with this 5mm Ackermann Steering plate! By changing the angle of ackermann, you will notice better control-ability of the car during mid corner and acceleration out of the corner! Feature: For: Xpress Execute XQ1 XQ1S XQ2S...

MSRP:

Was:

Now: £17.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress 4.8mm Ball End 10mm Thread 4pcs

Execute XQ1 4.8mm Ball End 10mm Thread 4pcs Feature: For: Xpress Execute XQ1 Material: Steel Colour: Black Include: 4.8mm Ball Ends (4 pcs)

MSRP:

Was:

Now: £7.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare

Previous
8
9
10
11
12
13
14
15
16
17
18
Next