Xpress Car Kits, Spares & Upgrades

Xpress

Composite Rear Upright 2pcs V2 For Execute Series Touring

V2 of our rear uprights. We have further added more material to the hub for higher durability. **Note: If you are upgrading the suspension of XQ1 or XQ1S, you also need to purchase the 3.0mm outer suspension pins #XP-10602 and Hard Strong Front And Rear...

MSRP:

Was:

Now: £8.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
X-Square

X-Square Stainless Steel 95x45mm Battery Balancing Weight 32g

A medium weighted piece for balancing your car out or used to meet weight restrictions in racing, tucks nicely underneath touring car batteries or slots nicely into pan cars/f1! Feature: For: RC Car Colour: Stainless Steel Material:...

MSRP:

Was:

Now: £14.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
X-Square

X-Square Stainless Steel 95x33mm Battery Balancing Weight 25g

A medium weighted piece for balancing your car out or used to meet weight restrictions in racing, tucks nicely underneath touring car batteries or slots nicely into pan cars/f1! Feature: For: RC Car Colour: Stainless Steel Material:...

MSRP:

Was:

Now: £14.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
X-Square

X-Square Graphite 1.6mm 2.0mm Front Brace For X2-00107 XQ10 Shock Mount Bulkhead

Spare and optional front graphite brace for the Shock Mounting Upper Bulkhead Set for Xpress's XQ10 conversion set. Feature: For: X-Square X2-00107 Material: Graphite Colour: Black Specification: 1.6mm Brace (1...

MSRP:

Was:

Now: £18.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

5.5mm Ball 10mm Thread 4pcs (longer gap between flange)

This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle. Feature: For: Xpress Shock Mounting Material: Steel Colour: Black Include: 5.5mm Ball Ends (4 pcs)

MSRP:

Was:

Now: £7.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

5.5mm Ball 8mm Thread 4pcs (longer gap between flange)

This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle. Feature: For: Xpress Shock Mounting Material: Steel Colour: Black Include: 5.5mm Ball Ends (4 pcs)

MSRP:

Was:

Now: £7.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Graphite 3.0MM Rear Short Shock Tower For EXECUTE XQ1 XQ1S XQ2S

Run short shocks (#XP-10593) on your Execute XQ1 XQ1S or XQ2S! With short shocks you get more stability through corners which results in more consistent laptimes! **Note: For XQ1 and XQ1S, need to use with Execute XQ10 Short Shock Set V2 Long Travel...

MSRP:

Was:

Now: £19.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Hard Strong Composite V2 C Hub 4 Degree For Execute Series Touring

Updated C Hubs found on the Execute XQ2S #XP-90032 and can also be used in other Execute Touring cars when used in conjunction with 3.0mm outer suspension pin arms and the #XP-10401 C-hub king pin set! Feature: For: Xpress Execute XQ2S DR1S For...

MSRP:

Was:

Now: £8.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

King Pin Set 2+2 For Execute V2 Strong C-hub

Replacement King pin for the new V2 Strong C-Hub found on the Execute XQ2S DR1S, be sure to keep a set in your parts bag or when you're upgrading from the old C Hubs! Note: To use this new collar with other touring chassis in the Execute series,...

MSRP:

Was:

Now: £6.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Motor Mount Post With Flange For Execute FM1S

Original replacement part for Execute FM1S and XQ10F, keep spares ready so your race day won't cut short! Feature: For: Xpress Execute FM1S XQ10F Material: Aluminium Colour: Red Include: Aluminium Motor Mount Flanged Post (1 pc)

MSRP:

Was:

Now: £8.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Chassis Stiffener Post For Execute FT1 FT1S

Execute FT1/FT1S genuine official replacement part from Xpress. Feature: For: Execute FT1 / FT1S Material: Aluminium Colour: Red Include: Chassis Stiffener Post (1 pc)

MSRP:

Was:

Now: £6.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Susumu

Susumu Workshop 210mm Wheelbase Graphite 2.0mm One Piece Top Deck For Xpress Execute FM1S

Optional Graphite Top deck for the Execute FM1S. Graphite decks offer better performance and flex consistency in high heat environments allowing you to do more consistent laptimes! Feature: For: Xpress Execute FM1S Material:...

MSRP:

Was:

Now: £22.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Low Profile Bumper Body Post Set V2

Newly designed bumper pieces and body posts to be used with the low profile bumper foam XP-10562. Included are two bodypost mounts to rotate the rear mounting by 90 degrees, to mount the body posts parallel to the chassis. Note: The bumper parts in this...

MSRP:

Was:

Now: £9.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

GT Competition 36X V2 Pre-Glued Wheel Set For 1/10 Touring

High grip rubber wheel set from Xpress for touring car competition use! Features a 12mm Hex mounting system and 0 offset, perfect for almost all touring chassis found on the market. This is a pre-glued wheelset, fit for controlled tire races. A...

MSRP:

Was:

Now: £29.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Dragnalo DR1S 1/10 4WD EP High Power Touring Car

Traditional touring cars are designed for use with 2s LiPo in line with a lot of the racing standards set by the racing organisations. But with the advancement in both LiPo and Brushless power systems technology, the DR1S was designed to handle power...

MSRP:

Was: £315.00

Now: £195.00

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Yeah Racing

Yeah Racing 82T Delrin Spur Gear 64DP for 1/10th Touring & Drift

High quality Competition Grade spur gears from Yeah Racing! High Precision injected Delrin ensures exact Concentric production and consistent teeth to give you pro-longed use, high efficiency and low-noise operation! Feature: For: 1/10 Touring and...

MSRP:

Was:

Now: £5.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Yeah Racing

Yeah Racing 83T Delrin Spur Gear 64DP for 1/10th Touring & Drift

High quality Competition Grade spur gears from Yeah Racing! High Precision injected Delrin ensures exact Concentric production and consistent teeth to give you pro-longed use, high efficiency and low-noise operation! Feature: For: 1/10 Touring and...

MSRP:

Was:

Now: £5.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Yeah Racing

Yeah Racing 84T Delrin Spur Gear 64DP for 1/10th Touring & Drift

High quality Competition Grade spur gears from Yeah Racing! High Precision injected Delrin ensures exact Concentric production and consistent teeth to give you pro-longed use, high efficiency and low-noise operation! Feature: For: 1/10 Touring and...

MSRP:

Was:

Now: £5.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Yeah Racing

Yeah Racing 81T Delrin Spur Gear 64DP for 1/10th Touring & Drift

High quality Competition Grade spur gears from Yeah Racing! High Precision injected Delrin ensures exact Concentric production and consistent teeth to give you pro-longed use, high efficiency and low-noise operation! Feature: For: 1/10 Touring and...

MSRP:

Was:

Now: £5.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Yeah Racing

Yeah Racing 80T Delrin Spur Gear 64DP for 1/10th Touring & Drift

High quality Competition Grade spur gears from Yeah Racing! High Precision injected Delrin ensures exact Concentric production and consistent teeth to give you pro-longed use, high efficiency and low-noise operation! Feature: For: 1/10 Touring and...

MSRP:

Was:

Now: £5.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare