XQ1 Upgrades

Susumu

Susumu Workshop Graphite 3.0mm Rear Shock Tower For Xpress Execute XQ2S

Economical upgrade part from Susumu Workshop for your Xpress Execute XQ2S, also fits with XQ1 and XQ1S for upgrading to short shocks setup. **Note: For XQ1 and XQ1S, need to use with Execute XQ10 Short Shock Set V2 Long Travel #XP-10593 or Sports...

Xpress

Hard Strong Composite Suspension Parts Set V2 For Execute Series Touring

New and improved suspension arms. These will be direct upgrade on the Execute series, during testing it was found that these suspension pieces gave more corner speed! Version 2 introduces an inner hole for mounting your rear shocks onto for a even more...

Xpress

2.25mm Graphite Main Chassis Plate For Execute Mid Motor Conversion Kit

Replacement part for the Mid Motor Conversion kit for Execute XQ1. Feature: For: Xpress Mid Motor Conversion Kit XP-10625 Material: Graphite Colour: Black Include: 2.25mm Graphite Main Chassis Plate (1 pc)

Xpress

On-power Control System V2 0 Deg Aluminium C-hub 2pcs For Execute Series Touring

This is the replacement part for the suspension arm from the On-power Control System V2 #XP-10641. On-power Control System changes how your car behaves in the middle of the corner, adjust the angle with spacers to differ the toe-in change during...

Xpress

Mid Motor Aluminium Rear Stiffener Deck For Execute XQ10

Replacement part for the XQ10 Touring chassis or Mid Motor Conversion kit for Execute XQ1! Rear stiffener allowing for different stiffness to be dialed into your chassis! Feature: For: Xpress Execute XQ1 Mid Motor Conversion Kit XP-10495 For: Xpress...

Xpress

Hard Strong Front And Rear Composite Suspension Arms V2 For Execute Series Touring

New and improved suspension arms, in our hard material. These will be direct upgrade on the Execute series, during testing it was found that these suspension pieces gave more corner speed! Version 2 introduces an inner hole for mounting your rear shocks...

Xpress

Hard Coated Universal Rear Dogbone 43mm 2pcs For Execute Series Touring

Aluminium universal shaft for replacing the rear steel driveshaft for a lighter and more efficient drivetrain. Feature: For: Xpress Execute 1/10 Touring Series Material: Aluminium Colour: Titanium   Include: Driveshafts (2...

Xpress

Aluminium C-hub 4 Deg 2pcs For On-power Control System V2

Positive caster angle rear C-Hubs for our On-Power Control System V2 #XP-10641, adding on-power stability to the rear. Whilst also shortening the wheelbase which can be handy when running 0 arm sweep. Also included are the new kingpin sets which are...

Xpress

Aluminium C-hub 2 Deg 2pcs For On-power Control System V2

Positive caster angle rear C-Hubs for our On-Power Control System V2 #XP-10641, adding on-power stability to the rear. Whilst also shortening the wheelbase which can be handy when running 0 arm sweep. Also included are the new kingpin sets which are...

Xpress

Aluminium 7075 Servo Horn 17-21mm 25T

Adjust the height of which your linkage connects to your servo horn easily with the slide-able mounting tab on this servo horn! Raise the height for a more aggressive responding car, whilst lower it for a more linear feel! Feature: For: 25T Servo...

Xpress

Aluminum 7075 Height Adjustable Servo Horn 17-21mm 23T

Adjust the height of which your linkage connects to your servo horn easily with the slide-able mounting tab on this servo horn! Raise the height for a more aggressive responding car, whilst lower it for a more linear feel! Feature: For: 23T Servo...

Xpress

Aluminum 20T Center Layshaft Pulley For Execute XQ1 XQ2S XQ1S XM1 XM1S FT1 FT1S

Aluminium upgrade pulley for Xpress sport series of cars, upgrade on the durability at the cost of a heavier drivetrain. Feature: For: Execute XQ1 XQ2S XQ1S XM1 XM1S FT1 FT1S Material: Aluminium Colour:...

Xpress

Composite Rear Upright 2pcs V2 For Execute Series Touring

V2 of our rear uprights. We have further added more material to the hub for higher durability. **Note: If you are upgrading the suspension of XQ1 or XQ1S, you also need to purchase the 3.0mm outer suspension pins #XP-10602 and Hard Strong Front And Rear...

X-Square

X-Square Graphite 1.6mm 2.0mm Front Brace For X2-00107 XQ10 Shock Mount Bulkhead

Spare and optional front graphite brace for the Shock Mounting Upper Bulkhead Set for Xpress's XQ10 conversion set. Feature: For: X-Square X2-00107   Material: Graphite   Colour: Black Specification: 1.6mm Brace (1...

Xpress

5.5mm Ball 10mm Thread 4pcs (longer gap between flange)

This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle. Feature: For: Xpress Shock Mounting Material: Steel Colour: Black Include: 5.5mm Ball Ends (4 pcs)

Xpress

5.5mm Ball 8mm Thread 4pcs (longer gap between flange)

This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle. Feature: For: Xpress Shock Mounting Material: Steel Colour: Black Include: 5.5mm Ball Ends (4 pcs)

Xpress

Graphite 3.0MM Rear Short Shock Tower For EXECUTE XQ1 XQ1S XQ2S

Run short shocks (#XP-10593) on your Execute XQ1 XQ1S or XQ2S! With short shocks you get more stability through corners which results in more consistent laptimes! **Note: For XQ1 and XQ1S, need to use with Execute XQ10 Short Shock Set V2 Long Travel...

Yeah Racing

Yeah Racing 82T Delrin Spur Gear 64DP for 1/10th Touring & Drift

High quality Competition Grade spur gears from Yeah Racing! High Precision injected Delrin ensures exact Concentric production and consistent teeth to give you pro-longed use, high efficiency and low-noise operation! Feature: For: 1/10 Touring and...

Yeah Racing

Yeah Racing 83T Delrin Spur Gear 64DP for 1/10th Touring & Drift

High quality Competition Grade spur gears from Yeah Racing! High Precision injected Delrin ensures exact Concentric production and consistent teeth to give you pro-longed use, high efficiency and low-noise operation! Feature: For: 1/10 Touring and...

Yeah Racing

Yeah Racing 84T Delrin Spur Gear 64DP for 1/10th Touring & Drift

High quality Competition Grade spur gears from Yeah Racing! High Precision injected Delrin ensures exact Concentric production and consistent teeth to give you pro-longed use, high efficiency and low-noise operation! Feature: For: 1/10 Touring and...