XQ10 Upgrades

X-Square

X-Square Graphite Capacitor Mount For 30x30mm Mounting

Easily mount the capacitor from your ESC onto the side with this graphite mounting solution. Mounts onto the underneath of your fan and extends to the side for a flat surface for you to apply mounting tape to secure your cap! Feature: For:...

MSRP:

Was:

Now: £10.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
X-Square

X-Square 4mm Graphite Bumper Brace For XQ10

Add protection for your chassis plate with this Graphite bumper brace designed to fill the gap between the bumper and the bulkhead! Feature: For: Execute XQ10 Color: Black Material: Graphite Include: Graphite Bumper...

MSRP:

Was:

Now: £10.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Aluminium FR One Piece Suspension Mount For XQ1 XQ1S XM1 XM1S FT1 FT1S XQ10

Aluminium one piece FR suspension mount for all of the Execute Series of cars, enlarged slot allowing this to be used with the XQ1 Mid conversion kit as well! Feature: For: Xpress Execute Series Material: Aluminium Colour: Red/Black Include: Aluminium...

MSRP:

Was:

Now: £18.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Brass FR One Piece Suspension Mount For Xpress Execute Series

Brass one piece FR suspension mount for all of the Execute Series of cars, enlarged slot allowing this to be used with the XQ1 Mid conversion kit as well! Use for more stability on high traction tracks! Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S,...

MSRP:

Was:

Now: £19.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

On-power Control System V2 For XQ1 XQ1S FT1 FT1S XQ10

Change how your car behaves in the middle of the corner with the Xpress on-power Control System (XOC), adjust the angle with spacers to differ the toe-in change during suspension compression. Comes with special cut arms so you can adjust the wheelbase to...

MSRP:

Was:

Now: £67.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Yeah Racing

Execute XQ10 Wide Bando Kevlar Drive Belt 4x351mm

4mm wide belts for modified racing or where durability is more important than drivetrain smoothness! Will fit most other mid mount cars which run 351mm belts as well. Feature: For: Xpress Execute XQ10 XQ1 Mid Material: Kevlar Colour:...

MSRP:

Was:

Now: £11.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
X-Square

X-Square White Kevlar Low Friction Belt 3x351mm 117T For 1/10 On-road Mid Xray T4 Yokomo BD10 Xpress XQ10

Low friction White Kevlar providing even a softer material than black kevlar which in turn gives a even smoother drivetrain over traditional black belts! 351mm most commonly used in mid-motor conversion kits! Feature: For: Xray T4, Yokomo BD10,...

MSRP:

Was:

Now: £15.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress Grey Composite 4.8mm Flat Type Ball End 13mm 4pcs

A new type of composite material, giving smoother action and prevents play for developing over a longer period of time! All plastics on the Execute XQ10 have been upgraded to this material! Keeping the flat shape design which allows you to run...

MSRP:

Was:

Now: £8.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
X-Square

X-Square Spring Steel Double Joint Driveshaft 41mm for Xray T2/T3 /T4 XPRESS FT1S/FT1/XQ1/XQ1S

Smoothen your car's cornering with these Double Jointed Driveshafts by X-Square! Compared to traditional single jointed drive shafts, by having double joints the angle of the universal at full steering lock is reduced, which in turn reduces the chatter...

MSRP:

Was:

Now: £42.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Silicone Gear Differential X-RING 5x2mm 10pcs For Execute Xpresso GripXero Series

Softer, less contact path allows these X Rings to not generate as much drag on your diff cups when compared to traditional o-rings! Feature: For: Xpress Execute FT1 FT1S XQ1 XQ1S XQ10 XQ10F XQ2S XM1 XM1S FM1S DR1S, Xpresso K1 M1, GripXero D1 Material:...

MSRP:

Was:

Now: £9.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress Graphite 3.0mm Chassis Stiffener For XQ10

Use this slimmed down version instead of the kit original T-Plate if you want to control longitudinal flex only. Flexible mounting options, put o-rings under to retain a minimal amount of flex or secure directly onto chassis for the stiffest...

MSRP:

Was:

Now: £7.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress Brass and Graphite Lower Bulkhead Plate Front Rear For XQ10

Control flex under the diff/spool area with this easy to install piece of graphite and brass. The brass piece also allows you to tune the weight bias of the car! Feature: For: Xpress Execute XQ10 Material: Graphite/Brass Color:...

MSRP:

Was:

Now: £22.50

MSRP:

Was:

Now: (Ex. VAT)

Out of stock Compare
X-Square

Aluminium FR Spilt Suspension Mount Set For Xpress XQ1 XQ1S XM1 XM1S FT1 FT1S XQ10

Easily test setup of a solid and split FR mount on your Xpress touring car with this suspension mount setup. Remove the stiffening bar with a ball-stud 2.0mm hex tool and you will have split blocks! This changes the flex in the FR suspension block area...

MSRP:

Was:

Now: £37.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress Grey Composite 4.8mm Flat Type Ball End 15mm 4pcs

A new type of composite material, giving smoother action and prevents play for developing over a longer period of time! All plastics on the Execute XQ10 have been upgraded to this material! Keeping the flat shape design which allows you to run a taller...

MSRP:

Was:

Now: £8.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Low Profile Foam Bumper For Execute XQ1 XQ1S XQ10

Lighter foam bumper for your Execute XQ1 and XQ1S, this allows you to shift the weight towards another area for more steering! With the new style of high front downforce bodies, this bumper fits nicely with them. The three extruding tabs can be cut down...

MSRP:

Was:

Now: £5.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Factory Pro

Factory Pro RC 117T 351 Low Friction Drive Belt For Xpress XQ1 Mid,ARC R11 MID, Awsomatix A800 MMCX, Zero Tribe Mid

Factory Pro RC 117T 351 Low Friction Drive Belt For XQ1, XQ1S MID Conversion, XQ10 ARC R11 MID Awsomatix A800 MMCX Zero Tribe Mid Conversion

MSRP:

Was:

Now: £15.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Brass 2 Piece Suspension Mount For Execute Series

Using these brass suspension pieces allows you to increase the weight without affecting the left to right balance! Direct replacement for the original two piece suspension mount. Feature: For: Execute XQ1 Material: Brass Colour: Black Include: Two...

MSRP:

Was:

Now: £19.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Yeah Racing

Xpress 30mm Windmill Alloy Case ESC Cooling Fan

Cool your ESC in hot temperatures with this aluminium cased fan, with the casing made from aluminium which will allow for it to act as a heatsink as well to help dissapate heat! Feature: For: ESC with 30mm mounting holes Material: Aluminum Colour:...

MSRP:

Was:

Now: £22.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Factory Pro

Factory Pro 3mm Red Shim/Washer (10 pcs)

Factory Pro 3mm Red Shim/Washer (10 pcs) Material - Alloy Colour - Red 10 per pack

MSRP:

Was:

Now: £6.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Camber Stiffener Link Ball End

This is Xpress Camber Stiffener Link Ball End for Execute Series, genuine official replacement part from Xpress. Feature: For: Xpress Execute XQ1 XQ10 XQ10F XM1 FT1 XQ1S XQ2S XM1S FT1S FM1S DR1S Material: Plastic Colour: Black Include: Camber...

MSRP:

Was:

Now: £9.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare