FT1 & FT1S Parts

Xpress

Xpress Mid Motor Aluminium Rear Stiffener Deck For Execute XQ10

Replacement part for the XQ10 Touring chassis or Mid Motor Conversion kit for Execute XQ1! Rear stiffener allowing for different stiffness to be dialed into your chassis! Feature: For: Xpress Execute XQ1 Mid Motor Conversion Kit XP-10495 For: Xpress...

MSRP:

Was:

Now: £16.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Long Travel Aluminum Short Shock Body 2pcs

Replacement long travel shock bodies for the Execute XQ10F. It is also a direct upgrade for the XQ2S stock shock body. If use as replacement of the out of box short shock from the XQ10 and FM1S, the droop length with less downstop will be increase by...

MSRP:

Was:

Now: £14.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress Hard Strong Front And Rear Composite Suspension Arms V2 For Execute Series Touring

New and improved suspension arms, in our hard material. These will be direct upgrade on the Execute series, during testing it was found that these suspension pieces gave more corner speed! Version 2 introduces an inner hole for mounting your rear shocks...

MSRP:

Was:

Now: £8.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress Hard Coated Universal Rear Dogbone 43mm 2pcs For Execute Series Touring

Aluminium universal shaft for replacing the rear steel driveshaft for a lighter and more efficient drivetrain. Feature: For: Xpress Execute 1/10 Touring Series Material: Aluminium Colour: Titanium Include: Driveshafts (2 pcs)

MSRP:

Was:

Now: £22.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Composite Upper Deck Stiffener 2pcs For Execute Series Touring

Plastic upper deck stiffener for tune the flex of the top deck stiffer but not too stiff when using the aluminium version! Feature: For: Xpress Execute XQ2S FT1 FT1S XQ10 XQ10F Material: Composite Colour: Black Include: Composite Stiffeners...

MSRP:

Was:

Now: £5.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Composite Rear Upright 2pcs (Hard) V2 For Execute Series Touring

V2 of our rear uprights. We have further added more material to the hub for higher durability. Hard composite version resulting in higher corner speed but may take away some drivability. **Note: If you are upgrading the suspension of XQ1 or XQ1S, you...

MSRP:

Was:

Now: £8.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Aluminium C-hub 4 Deg 2pcs For On-power Control System V2

Positive caster angle rear C-Hubs for our On-Power Control System V2 #XP-10641, adding on-power stability to the rear. Whilst also shortening the wheelbase which can be handy when running 0 arm sweep. Also included are the new kingpin sets which are...

MSRP:

Was:

Now: £45.00

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Aluminium C-hub 2 Deg 2pcs For On-power Control System V2

Positive caster angle rear C-Hubs for our On-Power Control System V2 #XP-10641, adding on-power stability to the rear. Whilst also shortening the wheelbase which can be handy when running 0 arm sweep. Also included are the new kingpin sets which are...

MSRP:

Was:

Now: £45.00

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress Aluminium 7075 Servo Horn 17-21mm 25T

Adjust the height of which your linkage connects to your servo horn easily with the slide-able mounting tab on this servo horn! Raise the height for a more aggressive responding car, whilst lower it for a more linear feel! Feature: For: 25T Servo...

MSRP:

Was:

Now: £20.00

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress Aluminium 7075 Height Adjustable Servo Horn 17-21mm 23T

Adjust the height of which your linkage connects to your servo horn easily with the slide-able mounting tab on this servo horn! Raise the height for a more aggressive responding car, whilst lower it for a more linear feel! Feature: For: 23T Servo Spline...

MSRP:

Was:

Now: £20.00

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress Aluminium 20T Center Layshaft Pulley

Aluminium upgrade pulley for Xpress sport series of cars, upgrade on the durability at the cost of a heavier drivetrain. Feature: For: Execute XQ1 XQ2S XQ1S XM1 XM1S FT1 FT1S Material: Aluminium Colour: Red/Black Include: Aluminium Pulley (1 pc)

MSRP:

Was:

Now: £15.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

4.8mm Low Profile Ball End 13mm 4pcs

This is Execute XQ1 Execute 4.8mm Low Profile Ball End, genuine official replacement part from Xpress. Feature: For: Xpress Execute XQ1 Material: Plastic Colour: Black Include: Low Profile Ball End 13mm (4 pcs)

MSRP:

Was:

Now: £7.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress Replacement Silicone Parts Set For Xpresso Execute Series

This is Xpress Replacement Silicone Parts Set, genuine official replacement part from Xpress. Feature: For: Xpress Xpresso K1, M1, Execute XQ1S, XM1, XM1S, FT1S, FM1S Material: Silicone Colour: White Include: Shock Membrane (4 pcs) Gear Diff...

MSRP:

Was:

Now: £5.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Long Travel Short Shock Grey Composite Shock Parts

Replacement plastic shock parts for the V2 long travel short shock set #XP-10593, this is a direct upgrade for the stock shocks from the XQ2S. It can still fit with original kit short shock from XQ10 and FM1S, but the shock length will be decrease...

MSRP:

Was:

Now: £9.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress Composite Wheel Hub Hex Set 4pcs For Execute

Execute XQ1S XQ2S XM1S FT1S FM1S genuine official replacement part from Xpress. Feature: For: Xpress Execute XQ1S XQ2S XM1S FT1S FM1S Material: Plastic Colour: Black Include: Wheel Hex (4 pcs) Wheel Hex Pins (4 pcs)

MSRP:

Was:

Now: £5.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Xpress Aluminium Upper Shock Cap For Execute XQ1S XM1S FT1S FM1S

Execute XQ1S XM1S FT1S FM1S genuine official replacement part from Xpress. Feature: For: Xpress Execute XQ1S XM1S FT1S FM1S Material: Aluminium Colour: Red Include: Aluminium Upper Shock Cap (2 pcs)

MSRP:

Was:

Now: £4.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Composite Rear Upright 2pcs V2 For Execute Series Touring

V2 of our rear uprights. We have further added more material to the hub for higher durability. **Note: If you are upgrading the suspension of XQ1 or XQ1S, you also need to purchase the 3.0mm outer suspension pins #XP-10602 and Hard Strong Front And Rear...

MSRP:

Was:

Now: £8.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

5.5mm Ball 10mm Thread 4pcs (longer gap between flange)

This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle. Feature: For: Xpress Shock Mounting Material: Steel Colour: Black Include: 5.5mm Ball Ends (4 pcs)

MSRP:

Was:

Now: £7.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

5.5mm Ball 8mm Thread 4pcs (longer gap between flange)

This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle. Feature: For: Xpress Shock Mounting Material: Steel Colour: Black Include: 5.5mm Ball Ends (4 pcs)

MSRP:

Was:

Now: £7.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Hard Strong Composite V2 C Hub 4 Degree For Execute Series Touring

Updated C Hubs found on the Execute XQ2S #XP-90032 and can also be used in other Execute Touring cars when used in conjunction with 3.0mm outer suspension pin arms and the #XP-10401 C-hub king pin set! Feature: For: Xpress Execute XQ2S DR1S For Xpress...

MSRP:

Was:

Now: £8.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare

Previous
1
2
3
4
5
6
7
8
9
10
11
Next