XQ2S Parts

Xpress

Aluminium C-hub 4 Deg 2pcs For On-power Control System V2

Positive caster angle rear C-Hubs for our On-Power Control System V2 #XP-10641, adding on-power stability to the rear. Whilst also shortening the wheelbase which can be handy when running 0 arm sweep. Also included are the new kingpin sets which are...

MSRP:

Was:

Now: £45.00

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Aluminium C-hub 2 Deg 2pcs For On-power Control System V2

Positive caster angle rear C-Hubs for our On-Power Control System V2 #XP-10641, adding on-power stability to the rear. Whilst also shortening the wheelbase which can be handy when running 0 arm sweep. Also included are the new kingpin sets which are...

MSRP:

Was:

Now: £45.00

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Aluminium 7075 Servo Horn 17-21mm 25T

Adjust the height of which your linkage connects to your servo horn easily with the slide-able mounting tab on this servo horn! Raise the height for a more aggressive responding car, whilst lower it for a more linear feel! Feature: For: 25T Servo...

MSRP:

Was:

Now: £20.00

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Aluminum 7075 Height Adjustable Servo Horn 17-21mm 23T

Adjust the height of which your linkage connects to your servo horn easily with the slide-able mounting tab on this servo horn! Raise the height for a more aggressive responding car, whilst lower it for a more linear feel! Feature: For: 23T Servo Spline...

MSRP:

Was:

Now: £20.00

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

3.0mm Floating Servo Holder For Mid Motor Conversion Kit XP-10625

Replacement part for the Mid Motor Conversion kit for Execute XQ1 and XQ10 Feature: For: Xpress Mid Motor Conversion Kit XP-10625 and XQ10 Material: Graphite Colour: Black Include: 3.0mm Floating Servo Holder (1 pc)

MSRP:

Was:

Now: £17.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Aluminum 20T Center Layshaft Pulley For Execute XQ1 XQ2S XQ1S XM1 XM1S FT1 FT1S

Aluminium upgrade pulley for Xpress sport series of cars, upgrade on the durability at the cost of a heavier drivetrain. Feature: For: Execute XQ1 XQ2S XQ1S XM1 XM1S FT1 FT1S Material: Aluminium Colour:...

MSRP:

Was:

Now: £15.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

4.8mm Low Profile Ball End 13mm 4pcs

This is Execute XQ1 Execute 4.8mm Low Profile Ball End, genuine official replacement part from Xpress. Feature: For: Xpress Execute XQ1 Material: Plastic Colour: Black Include: Low Profile Ball End 13mm (4 pcs)

MSRP:

Was:

Now: £7.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Long Travel Short Shock Grey Composite Shock Parts

Replacement plastic shock parts for the V2 long travel short shock set #XP-10593, this is a direct upgrade for the stock shocks from the XQ2S. It can still fit with original kit short shock from XQ10 and FM1S, but the shock length will be decrease...

MSRP:

Was:

Now: £9.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Composite Wheel Hub Hex Set 4pcs For Execute

Execute XQ1S XQ2S XM1S FT1S FM1S genuine official replacement part from Xpress. Feature: For: Xpress Execute XQ1S XQ2S XM1S FT1S FM1S Material: Plastic Colour: Black Include: Wheel Hex (4 pcs) Wheel Hex Pins (4 pcs)

MSRP:

Was:

Now: £5.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Composite Rear Upright 2pcs V2 For Execute Series Touring

V2 of our rear uprights. We have further added more material to the hub for higher durability. **Note: If you are upgrading the suspension of XQ1 or XQ1S, you also need to purchase the 3.0mm outer suspension pins #XP-10602 and Hard Strong Front And Rear...

MSRP:

Was:

Now: £8.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

5.5mm Ball 10mm Thread 4pcs (longer gap between flange)

This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle. Feature: For: Xpress Shock Mounting Material: Steel Colour: Black Include: 5.5mm Ball Ends (4 pcs)

MSRP:

Was:

Now: £7.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

5.5mm Ball 8mm Thread 4pcs (longer gap between flange)

This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle. Feature: For: Xpress Shock Mounting Material: Steel Colour: Black Include: 5.5mm Ball Ends (4 pcs)

MSRP:

Was:

Now: £7.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Graphite 3.0MM Rear Short Shock Tower For EXECUTE XQ1 XQ1S XQ2S

Run short shocks (#XP-10593) on your Execute XQ1 XQ1S or XQ2S! With short shocks you get more stability through corners which results in more consistent laptimes! **Note: For XQ1 and XQ1S, need to use with Execute XQ10 Short Shock Set V2 Long Travel...

MSRP:

Was:

Now: £19.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Hard Strong Composite V2 C Hub 4 Degree For Execute Series Touring

Updated C Hubs found on the Execute XQ2S #XP-90032 and can also be used in other Execute Touring cars when used in conjunction with 3.0mm outer suspension pin arms and the #XP-10401 C-hub king pin set! Feature: For: Xpress Execute XQ2S DR1S For...

MSRP:

Was:

Now: £8.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

King Pin Set 2+2 For Execute V2 Strong C-hub

Replacement King pin for the new V2 Strong C-Hub found on the Execute XQ2S DR1S, be sure to keep a set in your parts bag or when you're upgrading from the old C Hubs! Note: To use this new collar with other touring chassis in the Execute series,...

MSRP:

Was:

Now: £6.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Low Profile Bumper Body Post Set V2

Newly designed bumper pieces and body posts to be used with the low profile bumper foam XP-10562. Included are two bodypost mounts to rotate the rear mounting by 90 degrees, to mount the body posts parallel to the chassis. Note: The bumper parts in this...

MSRP:

Was:

Now: £9.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Composite Steering Set For Execute Series

Original replacement part for the Execute XQ1S, XM1S, and FM1S, keep spares ready so your race day won't cut short! **Note: The side servo mount does not fit on FM1S, please use FM1S Composite Side Servo Mount #XP-10741 Feature For: Xpress Execute...

MSRP:

Was:

Now: £9.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

FRP 2.0mm Top Deck V2 For Execute XQ2S XQ1S

Replacement top deck for the Execute XQ2S, which can also be used on the XQ1S to introduce the flex elimination system to the car! Feature: For: Xpress Execute XQ1S XQ2S Material: FRP Coluor: Black Include: Top Deck (1 pc)

MSRP:

Was:

Now: £10.95

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

Flanged Bearing 3x6x2.5mm 2pcs For Execute Flex Elimination Upper Deck

3x6x2.5mm flanged bearing, for use in Execute Flex Elimination Upper Deck adjustment area.The Flex Eliminator Upper Deck comes out of box from the XQ2S, FM1S and XQ10F kits.If use with XQ10, please use with 2.0mm Graphite Upper Deck For Flex Elimination...

MSRP:

Was:

Now: £5.50

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare
Xpress

2mm Aluminium Main Chassis Plate For Execute XQ1 XQ1S XQ2S

Aluminium bottom chassis for Execute XQ2S, used for in either High Grip Asphalt or Carpet. By adding more weight to the lowest point of the chassis, this increases stability and lowers the center of gravity! It also fits with XQ1 and XQ1S...

MSRP:

Was:

Now: £65.00

MSRP:

Was:

Now: (Ex. VAT)

Add to Cart Compare