XQ10 & XQ10R Parts

Xpress

Hard Coated Universal Rear Dogbone 43mm 2pcs For Execute Series Touring

Aluminium universal shaft for replacing the rear steel driveshaft for a lighter and more efficient drivetrain. Feature: For: Xpress Execute 1/10 Touring Series Material: Aluminium Colour: Titanium   Include: Driveshafts (2...

Xpress

Graphite 2.0mm One Piece Top Deck For Execute XQ10F XQ10 FWD Conversion

For some specific tracks that require less chassis flex, this one piece top deck on your FWD Converted XQ10 will allow more control and stability whilst cornering in both low and high speed corners! It fits with XQ10F as well. Feature: For: Xpress...

Xpress

Composite Upper Deck Stiffener 2pcs For Execute Series Touring

Plastic upper deck stiffener for tune the flex of the top deck stiffer but not too stiff when using the aluminium version! Feature: For: Xpress Execute XQ2S FT1 FT1S XQ10 XQ10F Material: Composite Colour: Black Include: Composite Stiffeners...

Xpress

Composite Rear Upright 2pcs (Hard) V2 For Execute Series Touring

V2 of our rear uprights. We have further added more material to the hub for higher durability. Hard composite version resulting in higher corner speed but may take away some drivability.   **Note: If you are upgrading the suspension of XQ1 or...

Xpress

Aluminium C-hub 4 Deg 2pcs For On-power Control System V2

Positive caster angle rear C-Hubs for our On-Power Control System V2 #XP-10641, adding on-power stability to the rear. Whilst also shortening the wheelbase which can be handy when running 0 arm sweep. Also included are the new kingpin sets which are...

Xpress

Aluminium C-hub 2 Deg 2pcs For On-power Control System V2

Positive caster angle rear C-Hubs for our On-Power Control System V2 #XP-10641, adding on-power stability to the rear. Whilst also shortening the wheelbase which can be handy when running 0 arm sweep. Also included are the new kingpin sets which are...

Xpress

Aluminium 7075 Servo Horn 17-21mm 25T

Adjust the height of which your linkage connects to your servo horn easily with the slide-able mounting tab on this servo horn! Raise the height for a more aggressive responding car, whilst lower it for a more linear feel! Feature: For: 25T Servo...

Xpress

Aluminum 7075 Height Adjustable Servo Horn 17-21mm 23T

Adjust the height of which your linkage connects to your servo horn easily with the slide-able mounting tab on this servo horn! Raise the height for a more aggressive responding car, whilst lower it for a more linear feel! Feature: For: 23T Servo...

Xpress

3mm Graphite Servo Mount Plate For XQ10F XQ10 FWD Conversion

Original replacement part for the Execute XQ10F and XQ10 FWD conversion Kit, keep spares ready so your race day won't cut short! Feature: For: Execute XQ10 FWD Conversion Kit #XP-10737 and XQ10F Material: Graphite Colour:...

Xpress

3.0mm Floating Servo Holder For Mid Motor Conversion Kit XP-10625

Replacement part for the Mid Motor Conversion kit for Execute XQ1 and XQ10 Feature: For: Xpress Mid Motor Conversion Kit XP-10625 and XQ10 Material: Graphite Colour: Black Include: 3.0mm Floating Servo Holder (1 pc)

Xpress

2mm Graphite Rear Top Deck For Execute XQ10F XQ10 FWD Conversion

Type a description for this product here...

Xpress

2.25mm Graphite Main Chassis For XQ10F XQ10 FWD Conversion

Original replacement part for the Execute XQ10F and XQ10 FWD conversion Kit, keep spares ready so your race day won't cut short! Feature: For: Execute XQ10 FWD Conversion Kit #XP-10737 and XQ10F Material: Graphite Colour:...

Xpress

4.8mm Low Profile Ball End 13mm 4pcs

This is Execute XQ1 Execute 4.8mm Low Profile Ball End, genuine official replacement part from Xpress. Feature: For: Xpress Execute XQ1 Material: Plastic Colour: Black Include: Low Profile Ball End 13mm (4 pcs)

Xpress

Long Travel Short Shock Grey Composite Shock Parts

Replacement plastic shock parts for the V2 long travel short shock set #XP-10593, this is a direct upgrade for the stock shocks from the XQ2S.  It can still fit with original kit short shock from XQ10 and FM1S, but the shock length will be decrease...

Xpress

Composite Wheel Hub Hex Set 4pcs For Execute

Execute XQ1S XQ2S XM1S FT1S FM1S genuine official replacement part from Xpress. Feature: For: Xpress Execute XQ1S XQ2S XM1S FT1S FM1S Material: Plastic Colour: Black Include: Wheel Hex (4 pcs) Wheel Hex Pins (4 pcs)

Xpress

Composite Rear Upright 2pcs V2 For Execute Series Touring

V2 of our rear uprights. We have further added more material to the hub for higher durability. **Note: If you are upgrading the suspension of XQ1 or XQ1S, you also need to purchase the 3.0mm outer suspension pins #XP-10602 and Hard Strong Front And Rear...

Xpress

5.5mm Ball 10mm Thread 4pcs (longer gap between flange)

This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle. Feature: For: Xpress Shock Mounting Material: Steel Colour: Black Include: 5.5mm Ball Ends (4 pcs)

Xpress

5.5mm Ball 8mm Thread 4pcs (longer gap between flange)

This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle. Feature: For: Xpress Shock Mounting Material: Steel Colour: Black Include: 5.5mm Ball Ends (4 pcs)

Xpress

Hard Strong Composite V2 C Hub 4 Degree For Execute Series Touring

Updated C Hubs found on the Execute XQ2S #XP-90032 and can also be used in other Execute Touring cars when used in conjunction with 3.0mm outer suspension pin arms and the #XP-10401 C-hub king pin set! Feature: For: Xpress Execute XQ2S DR1S For...

Xpress

King Pin Set 2+2 For Execute V2 Strong C-hub

Replacement King pin for the new V2 Strong C-Hub found on the Execute XQ2S DR1S, be sure to keep a set in your parts bag or when you're upgrading from the old C Hubs! Note: To use this new collar with other touring chassis in the Execute series,...